I'm slooowly working on my '59 LeSabre and am cleaning the surfaces for the frame, fender wells. rear axle, suspension parts, etc. I read a ton of good things about POR 15, but it seems like it is not the easiest to apply. Apparently you need to use it as fast as you can or store it with no air in the container or it will go bad. It will stain permanently if you do not clean up immediately. Also seems like bare metal has to be etched with their prep.
Who has experience? I did my whole GN frame, underside, etc with Rustoleum of all things and it is still holding up great years later.
Who has experience? I did my whole GN frame, underside, etc with Rustoleum of all things and it is still holding up great years later.