Pete Tomka Cold Air Intake/Hose

[turbo6mike]

Im looking for a Pete Tomka Cold Air Intake with 3.5 hose and a stock mass air sensor set up.

Also looking for replacement hose 3.5 or 4 inch for his set up or were he bought the hose from.

Thanks, Mike

 

[Anthony P]

Hi Mike, I've written about this in the past....

Pete used Aeroduct brand ducting in the CEET variation....

3 inch duct is CEET-12
4 inch duct is CEET-16

Aeroduct is not available in 3.5 inch

Read the material differences and purchase Aeroduct from WicksAircraft. link below

Aeroduct Ducting - Wicks Aircraft Parts

Neoprene and silicone impregnated wire coil supported fiberglass aircraft ducting meets applicable FAA and military specifications. Neoprene ducting is stocked in 10 foot lengths. Silicone ducting is stocked in 11 foot lengths. Odorless and nontoxic ducting is important in heat and vent systems...

www.wicksaircraft.com

If you want a 3.5 inch hose, you have to look at a CEET equivalent hose - Vena MTD - from AircraftSpruce.

Vena Mtd (CEET Equivalent) Flexible Aircraft Ducting - Cut To Length | Aircraft Spruce ®

Vena Mtd (CEET Equivalent) Flexible Aircraft Ducting - Cut To Length Ducting used to convey air or gaseous fluids at medium temperatures and with high resistance to aging.

www.aircraftspruce.com

 

[turbo6mike]

Thanks for all the info I check it out.

 

[turbo6mike]

Still looking to see if anyone has the whole cold air set up for stock turbo with stock mass air for sale.
Im looking for a friend that wants his cold air intake. Thanks

 

[NCTURBOS]

Mike... DM'ing you!

 

[turbo6mike]

Sent pm