Pic of Gbodyparts 10 inch wide T-Type wheels

[texasterror]

I really like the stock T-Type Wheels, does anyone have a pic of the 10 inch ones from gbodyparts.com on their car. If so could you post a pic so I can see how they look. thanks.

 

[Squid4life]

I only see 6, 7, and 8 in a T wheel. They have a 10"?

 

[BEATAV8]

Ya I think the closest you could get to a 10" T type wheel would be to acquire some 8.5" vectors and have them widened 1" on the back side.

 

[BEATAV8]

 

[BEATAV8]

 

[Squid4life]

DAMN! What size tire is that? Looks AMAZING! Mind shooting me a message or posting who did the widen job?

 

[BEATAV8]

Those are 295 55's

Weldcraft Wheel in Michigan added the extra inch to the wheels. No spacers and no rubs on the inside. But I need to roll the fenders just a little bit on the outside.

 

[BEATAV8]

and g-body parts had the adapters to use the stock T center caps with the old Vectors.

 

[BEATAV8]

 

[BEATAV8]

 

[BEATAV8]

http://www.weldcraftwheels.com/

 

[Squid4life]

Love it! Thanks brother!

 

[texasterror]

http://www.gbodyparts.com/product_info.php?cPath=46_22_25&products_id=40 G body parts has them in 10 inches. Thanks for the pics. They look bad ass.

 

[Squid4life]

http://www.gbodyparts.com/product_info.php?cPath=46_22_25&products_id=40 G body parts has them in 10 inches. Thanks for the pics. They look bad ass.

Crap, totally missed that. Thank you!

 

[BEATAV8]

I did not know they were making those either. Cool!

I am wondering what they are / how they are made.

 

[coach]

Hello Guys,
Here are my 10 inch Vectors. Only problem is...you have to narrow your rear housing 2 inches per side to get them to fit. I am in the process of re-engineering a different frame, and cutting a rear housing to fit these.
These are out there. I have 2 pair...one with slicks, and one with drag radials.

 

[texasterror]

re-engineer?!?!?! I was hoping the 10 inches are plug and play.

Hello Guys,
Here are my 10 inch Vectors. Only problem is...you have to narrow your rear housing 2 inches per side to get them to fit. I am in the process of re-engineering a different frame, and cutting a rear housing to fit these.
These are out there. I have 2 pair...one with slicks, and one with drag radials.

View attachment 226120 View attachment 226121 View attachment 226122

?!?

 

[coach]

re-engineer?!?!?! I was hoping the 10 inches are plug and play.

?!?

You can have factory wheels widened and be fine. The 10" VECTOR wheels that I posted have a very small backspace and require some major mods to get them to fit. Notice how much deeper the ribs go in my pics? Widened factory rims are plug and play...10" VECTOR's are not.

 

[texasterror]

You can have factory wheels widened and be fine. The 10" VECTOR wheels that I posted have a very small backspace and require some major mods to get them to fit. Notice how much deeper the ribs go in my pics? Widened factory rims are plug and play...10" VECTOR's are not.

Ok great, for a second there I was a tad bit bummed out. Cool, i'll eventually be ordering these then but the pics people posted gave me a good idea of how ubber cool my car will look with them on (the white car that's my avatar).

 

[Mike Licht]

Weldcraft did a set of T wheels for me a long time ago, had the backs wider and the fronts narrowed, should have kept them
Mike