Power Logger and SD2 problem

[Amab145]

Hey guys, hoping I can get some help here. While tuning in the PL software today, I didn't like how the car was responding to the adjustments I was making, so I went back and uploaded the log I had yesterday when the car ran decent and sent it from my laptop to the PL. When I did, all hell broke loose. The car would start and immediately die, so when I went and looked at the Target AFR, VE, and Spark tables, they were all screwed up, now the car won't run at all.

When I view the log, all the tables are fine. When i try and upload them to the PL, they go crazy. Here are some pictures of what my tables look like when viewing the log as well as after I send it to the PL. Please HELP!!! I am running the most recent version of PL software.

 

[BobbyBuick]

dod you check your injector size and the BLM grid for the proper settings?

 

[Amab145]

Yes, All those settings are correct.

 

[TurboBob]

something happened, you must have uploaded a bad file or something. email me the tune file you uploaded and any old tune files.

Bob

 

[TurboBob]

you should be able to reset the system to defaults and get it running again.

B

 

[Amab145]

I did reset the system by putting a 1 in box 16, and all 16 boxes reset, however the VE, Spark, and AFR tables remain unchanged. I emailed you the most recent log

 

[TurboBob]

are you loading logfiles as a tune?

 

[Amab145]

Apparently I am. I never saved a tune file. I thought they were one in the same, huge mistake on my part. How do I get a tune file to get it running where I can adjust it from there? I screwed it up big time i guess.

 

[TurboBob]

i emailed you one

pulling the tune file out of a log (there is one saved there as a reference) would be a good feature though.

B

 

[Amab145]

Great thanks so much Bob. I will Save the one you sent me as a tune first. Obviously I don't know what the hell i'm doing with this software at all, I'm still very new at it. I am familiar with EFI Live coming from the SBC and diesel background, and that is how EFI Live worked, a tune and a log file were essentially one in the same. I could log something, adjust it and re-upload it as a "new" tune. My bad.

 

[TurboBob]

that would be a cool feature. at the moment, all the tuning needs to be done online. so a bit different than tuning based on logs.

Bob