Powerlogger Fue PSI logginf sensor choices:?

[turbo96max]

i know the sensors from caspers and autometer will work, but i was wondering if anyone has ventured to try out other more economic sensor? like oem or autogauge etc:

here are some findings, any thoughts?
0-90 psi 2 prong
http://www.ebay.com/itm/220744082531?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2648

0-100 psi 1 prong
http://www.ebay.com/itm/SALEEN-Fuel...Parts_Accessories&hash=item589254fc41&vxp=mtr

 

[TURBOPOWERED68]

this one i have thinking about
http://www.ebay.com/itm/250799543734?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649#ht_675wt_754
there is another one that i have on the short list but i can't find the link now

 

[BEATAV8]

I've been using one from Razor. Comes with a harness to tap supply voltage from the tps sensor.

 

[Pronto]

That one from Taiwan is damn cheap. If it's accurate then it's a buy.

 

[TurboDave]

i know the sensors from caspers and autometer will work, but i was wondering if anyone has ventured to try out other more economic sensor? like oem or autogauge etc:

here are some findings, any thoughts?
0-90 psi 2 prong
http://www.ebay.com/itm/220744082531?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2648

0-100 psi 1 prong
http://www.ebay.com/itm/SALEEN-Fuel...Parts_Accessories&hash=item589254fc41&vxp=mtr

Problem with either of those is, I see NO data indicating what their output voltage characteristics and values are. You need to know these things so you can tweak the plc ini file to match.

 

[Pronto]

Yes, that's true. I suppose he could ask that on the ebay page.

 

[Pronto]

This looks like a reasonable item. I believe the specs will work too.
http://www.ebay.com/itm/Pressure-tr...=6419149183021133442&pid=100005&prg=1003&rk=1

 

[TurboBob]

the 1 wire and 2 wire sensors will most likely be resistive senders, and be a huge pain to make work decently. For the cost, that 3wire one looks like the one to run.

Note that fuel-rail mounting it will subject it to a lot of vibration. so keep an eye on it to make sure it doesn't loosen or leak.

Bob

 

[turbo96max]

thanks guys for the help, does any one know what the specs are on the autometer units? the pl unit i picked up was using an autometer. i will be ordering this one:

http://www.ebay.com/itm/Pressure-tr...=6419149183021133442&pid=100005&prg=1003&rk=1

so the .5 4.5v signal.... ill will let you guys know how it works. im wondering if i will need to make any changes on the pl , new to the pl game

 

[BobbyBuick]

Ive got the 3 wire and it works fine however as Bob said watch the FR for leaks and I also am using the same sensor for Oil Pressure

 

[turbo96max]

thanks for the headsup BoobyBuick

 

[TurboBob]

The extra channels in PL are configurable for your sensor. Post back when you get them installed.

Bob