Precisioni 6765 what compressor cover size?

[mtm864]

Hey guys ive decided on what turbo i will be going with on my gn. Im going with the Precision 6765 and im just wanting to know what compressor size to go with. The choices on it are .60,.70,.72 ported H and for the .70 Ported s cover. I know on my boosted civic i had the .70 compressor on .63 exhaust which i will be going on the Gn with the .63ar exhaust. Thanks for all of the input and help guys

 

[bison]

Hey guys ive decided on what turbo i will be going with on my gn. Im going with the Precision 6765 and im just wanting to know what compressor size to go with. The choices on it are .60,.70,.72 ported H and for the .70 Ported s cover. I know on my boosted civic i had the .70 compressor on .63 exhaust which i will be going on the Gn with the .63ar exhaust. Thanks for all of the input and help guys

What horsepower level? It likely wont matter which one you go with. You would have to be running the compressor hard and not have any other inlet restriction for it to matter. If you have a stock location intercooler id avoid the H cover. The E is the smallest and easiest install since its like a stock cover. 3" in 2"out. S will work good but is tight on the heater hose coming out of the water pump.

 

[HighPSI]

"E" cover would be TSH legal where "S" isn't. Not sure if you're concerned about that

 

[Kip]

"E" cover would be TSH legal where "S" isn't. Not sure if you're concerned about that

Cal, did you mean THS?

Cheers, Kip

 

[HighPSI]

Yeah, that's it. All other classes start with TS_ (TSA, TSM, TSE, TSL, TSO..) so I mix this one up.

 

[mtm864]

ok i think i will be going with the e cover. Thanks guys