You can type here any text you want

Regal and gbody parts

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

Hy82e

Member
Joined
Sep 23, 2011
Messages
50
Strange Engineering double adjustable front coilovers (no spring) SOLD
Howe tall lower ball joints (New) $140
Jounce bars $30 pr
Radiator cross brace $20
Jeep steering shaft $SOLD
36mm hollow sway bar (3rd gen camaro?) SOLD
Seat belts $75
Interior pieces $make offer
Cutlass aluminum bumper supports $180 pr
Blazer front brake set (missing one caliper mount) $160
License plate pull down $15
Stock Made in the USA V8 clam shells and new poly moter mounts $60
Exhaust hangers $SOLD

PARTS BELOW ARE PICK UP ONLY
FORT WORTH TX 76117

Complete dash $SOLD
Regal hood $80
Regal trunk SOLD
Regal complete doors w/glass manual $200pr
Core support $75
Baffled gas tank $65

Plus shipping and PP. Contact me with
questions or pics.
 

Attachments

  • 20160927_202847.jpg
    20160927_202847.jpg
    1.9 MB · Views: 312
  • 20141030_142810.jpg
    20141030_142810.jpg
    5.2 MB · Views: 306
  • IMG_20130113_181040.jpg
    IMG_20130113_181040.jpg
    1.8 MB · Views: 296
  • 20141016_173520.jpg
    20141016_173520.jpg
    3.7 MB · Views: 289
  • 20160927_200427.jpg
    20160927_200427.jpg
    2.4 MB · Views: 287
  • 20160928_015822.jpg
    20160928_015822.jpg
    10.7 MB · Views: 297
  • 20170131_163532.jpg
    20170131_163532.jpg
    4.8 MB · Views: 154
  • 20170131_163959.jpg
    20170131_163959.jpg
    5.9 MB · Views: 147
  • 20170131_170028.jpg
    20170131_170028.jpg
    5.5 MB · Views: 148
  • 20170131_170417.jpg
    20170131_170417.jpg
    4.9 MB · Views: 140
Last edited:
Strange Engineering double adjustable coilovers (no springs) $350 - these are bolt in's for the front or rear? Do you have a part number?
 
El Corvino

They are fir the front.

Part# S5004A

There is no part# on them. I bought them used so I called Strange and they walked me through all the measurements.
They are 3.84" stroke. I was running stock lower a-arms so I was going to order the lower mounting pin and run it as a shock until I upgraded the lower a-arms or reinforced the stock lowers.
The factory a-arms stock won't hold the weight of the car, even reinforced they are not recommended.
 
Back
Top