Replacement Radiator Recommendations?

[GullsGN]

Skip the fbody as the the lower radiator hose on the pass tank is different. Go with a 87 regal 307 radiator cools just as well as the fbody on.
You will either have to remove oil cooler adalter or run a aux engine oil cooler.
The all alum radiator options with oil cooler are Alradco and GN1 performance.

If you want to pay for a OEM replacement then they are out there to.

Original radiator hose worked fine on mine. No need to change. 4 years and no leaks, seepage, or splits. Never a temp over 173*.

 

[turbo nasty]

I ran one as well for years till the tank leaked and then I used the 307 regal one. The hose hook is different on the fbody ...the connection is higher....and not saying it wont work but the core is the same as the 87 307 radiator so I prefer to use it as its designed for our lower hose setup up better.

 

[jason walker]

Which one is better the GN-1 radiator or the alardco ?


Posted from the TurboBuick.Com mobile app

 

[charlief1]

Peter (Alradco) is a member of the board and GN1 was kicked off the board for some bad vendor behavior I believe. That should tell you all you need to know.

 

[Red C5]

Lots of choices which is always great for consumers. I do believe that ours is the only one still made here, in the US. Both coolers, drop in installation, and it works!
In stock and shipping daily.
Thanks Charlie.

 

[coach]

Which one is better the GN-1 radiator or the alardco ?


Posted from the TurboBuick.Com mobile app

Get the ALRADCO. The craftsmanship is second to none.


Posted from the TurboBuick.Com mobile app

 

[jason walker]

Ordered the alardco today be here next Friday


Posted from the TurboBuick.Com mobile app

 

[1KWIKSIX]

Ordered the alardco today be here next Friday


Posted from the TurboBuick.Com mobile app

You will be very happy with your purchase from Peter (ALRADCO)
Don't forget to add a bottle of RMI25 .

dave