Had a buyer, but haven't heard from him in almost a week, so I'm reposting a pair of assembled ported stock iron heads. These include a flow chart. flowed 209 cfm intake and 194 cfm exhaust @ .500" lift. at 28" h20. Include 100# springs for a flat tappet cam and have been fully inspected. Valve Guides were also cut down for clearance with higher than stock lift cams. All work was done by Ken Hutcherson at BHW racing.
~Chris Hasty
Lebanon Missouri
417-718-4648 or message me here
650$
~Chris Hasty
Lebanon Missouri
417-718-4648 or message me here
650$