SCANMASTER ADL CONNECT

[EDawson]

Hey guys....Searched the forum in vain for an answer. Possibly the dumbest reach out for help. Scanmaster white wire to ADL port calls for a .125” spade connect. Can’t find one at any local parts stores or even Amazon. Wish they just included one. Am I missing something?? Would rather not splice into the back of the port and don’t want to drive around with the wire jammed into the ADL for too long.
Thanks

 

[grass doctor]

I just grab the smallest one I can find ...and file it or grind it to fit ,when I made up a couple portable SM for guys .....show yo a pic I a bit ...

 

[pacecarta]

you need to look for it in MM
heres a link to some on amazon 2.8mm
https://www.amazon.com/Baomain-Spli...male+spade&qid=1582838902&s=industrial&sr=1-4

 

[EDawson]

Thanks guys....appreciate it. Told you it was the dumbest post ever....

 

[grass doctor]

I know its not the best or prettiest but it works and fits perfect and holds .... I have had to do some filling on the 2.8 mm ones as well.... as some guys have jacked up aldl ports ...

 

[Fat Nat]

Just scotch lock it on the backside can always just be removed

 

[Speed Demon]

I use these with good success. Just tap the wire behind. https://www.ebay.com/itm/60Pcs-T-Ta...2876d775c5:g:9xEAAOSwbu1cZEYO&redirect=mobile