So if I got an HRParts sway bar....

[Bens87tr]

What other mods are required(recommended)? I looked at the writeup on their website, but I don't remember seeing anything about what other mods the GN test car had. I don't want to just assume it has HRParts control arms although it may. I know you can't run an ATR bar without at least modded LCA's. Also, are uppers recommended too?

 

[salvageV6]

Ben you just gotta look under my GN.

Got the lowers, uppers, and the bar.

Track rental April 29th at LVD, sign up.

Then again... you out 60ft. me anyway so you don't need any of those parts.

Uppers allow you to reset the pinion angle, lowers are for strength and use the good greaseable firm bushings, great arms and products.

I've got the adjustable crowfoot tool so you don't need to buy one to adjust the uppers if you get them.

I've got the ATR bar on salvageV6 with the HR Parts boxing kit and good bushing kit, works fine also.

Either setup would work on your car since you don't drive it.

Go with the HR bar for daily driving street cornering duty.

 

[Bens87tr]

Always with the wise-ass coment So do I NEED good LCA's or not?

 

[frankunderpsi]

yes ! Ben

you need LCA

Paul recommended his frame braces on my car so I do not rip the LCA out and put them thru the rear seats !! OUCH

 

[salvageV6]

Good lower control arms and bushings are the first mod., swaybar is the second mod. out back besides the air bags and good tires of course.

With your 60 ft.s on drag radials you don't need either on your car just yet.

You gonna race April 29th?

 

[Bens87tr]

I guess I probably don't need one yet, still contemplating though. Al, email me the info on the rental. I didn't even hear about it untill you mentioned it. Who's putting it on?

 

[salvageV6]

The usual Ben, Ferds.

http://www.svtoa.org/events_dd_spring_05_info.php

I like all of Pauls parts on the GN his stuff complements the Baer brakes and all.

If you have the money go for it for sure.

Or you can simply buy the lowers now with the good bushings and pick up a used ATR bar etc.

Pauls boxing kit and bushings also work well if you can get your cousin to weld the stockers all boxed up for free.

Paying for the welding on salvageV6 and the install meant I shoulda just bought the whole lowers complete and swapped them out.

Lots of options for you and Paul makes great stuff.

PS: Did Joe put a transbrake in your car?

 

[Bens87tr]

I haven't been able to get onto that website for the past 2 days. I want to sign up!!

 

[GNSCOTT]

I got on once in two days.

Typical Ferd product.

If you sign up I probably will, have to email Fritoman too.

 

[GNSCOTT]

Ooops, salvageV6 at Scott's house.

 

[salvageV6]

Ben I got on the SVTOA site today and signed up.

So they are up and running, go sign up quick.

 

[Bens87tr]

Already done.


Oh yeah, back to the topic. I'vs decided to hold off on the sway bar for this year. But I do need to spend some money so I'm getting a stereo system instead. I plan on driving the car to work each day, Al, so stop busting my balls about never driving it. Well, everyday that there is not rain in the forcast...