I would love to get that 64MM here
Stay tuned for some interesting Dyno tests.
- Thread starter Otto J
- Start date
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
- Joined
- May 27, 2001
- Messages
- 10,866
I would love to get that 64MM here
That turbo with a new compressor and turbine wheel should be hot.
Chow was thinking about that unit for his street car.
Since I have 60s and a single walbro, a 62 would be more than enough for me.
HOT ROD-GN
Active Member
- Joined
- Jun 10, 2009
- Messages
- 1,733
Otto need to bring my boy car up to you doing fuel pump up grade on the car , so give a call when you have a chance to put it on the DYNO.now the car got dual fogger to, if you remember we mad 605hr with one fogger one pump gas. so give me a call so you could put it on the list..
:biggrin::biggrin:
ps I'll bring the vid cam to.
:biggrin::biggrin:ps I'll bring the vid cam to.
87WE4BOOSTED
I NEED MORE BOOST!!
- Joined
- Jul 14, 2008
- Messages
- 880
Subscribed!
TR Custom Parts
Mark Hueffman - Owner
- Joined
- May 25, 2001
- Messages
- 12,735
Otto need to bring my boy car up to you doing fuel pump up grade on the car , so give a call when you have a chance to put it on the DYNO.now the car got dual fogger to, if you remember we mad 605hr with one fogger one pump gas. so give me a call so you could put it on the list..
ps I'll bring the vid cam to.
Let me know when you do this, would like to stop by!:biggrin:
Car # 2 with the 6765 will be dynoed and dialed in using the new XFI 2.0 on wed afternoon.
I will be keeping the boost around 25#s,pump gas-alky as it is a stock short block.
Car #3 should be here next week,I have to swap the new motor in and make a few other upgrades before testing.
Car #1 Just waiting for his schedule and a better weather day to get the car back to the shop.
I will be keeping the boost around 25#s,pump gas-alky as it is a stock short block.
Car #3 should be here next week,I have to swap the new motor in and make a few other upgrades before testing.
Car #1 Just waiting for his schedule and a better weather day to get the car back to the shop.
Pronto
No amount of evidence will ever persuade an idiot.
- Joined
- Dec 9, 2002
- Messages
- 16,792
Wish these tests could be live streamed!
I am not that advanced,another new england shop had a live cam,as far as i know it didnt last long though....
An update.
Car #1 came back in and I ended up having to up the injector to 60#ers to get enough fuel into it.
It was decided to leave the boost where it is at 23#s as the owner does not want to push the motor any higher.
I think he was also a little put aside how tough 545HP at the 225-65-15 tires is to drive below 45 MPH
Car # 2 made 560 at 21#s and decided it would rip the 3 lugs right off the convertor mounting pad at 5800RPM
It made a God awful noise and scared the crap out of me as i thought the motor came apart.
Luckily that was not the case and a call was put into Dusty and we are replacing the old 10 no name convertor(in the car when purchased) with a
new custom 9.5 PTC unit.
Will be restesting the car next week once convertor gets here.
Car # 3 is being dropped off next week and some major changes to the car where added so it will be a bit more time before we have results.
I will be making a post showing the improvements using a The PTC 9.5 convertor over other convertors.
I have made a few back to back swaps with convertors but would like a little more data before posting about it.
Car #1 came back in and I ended up having to up the injector to 60#ers to get enough fuel into it.
It was decided to leave the boost where it is at 23#s as the owner does not want to push the motor any higher.
I think he was also a little put aside how tough 545HP at the 225-65-15 tires is to drive below 45 MPH
Car # 2 made 560 at 21#s and decided it would rip the 3 lugs right off the convertor mounting pad at 5800RPM
It made a God awful noise and scared the crap out of me as i thought the motor came apart.
Luckily that was not the case and a call was put into Dusty and we are replacing the old 10 no name convertor(in the car when purchased) with a
new custom 9.5 PTC unit.
Will be restesting the car next week once convertor gets here.
Car # 3 is being dropped off next week and some major changes to the car where added so it will be a bit more time before we have results.
I will be making a post showing the improvements using a The PTC 9.5 convertor over other convertors.
I have made a few back to back swaps with convertors but would like a little more data before posting about it.
I did not turn the boost up on car number 1,the addition of the 60#ers was because the 50#ers where maxed out and a bit lean.
With 60#ers the air fuel is now in check.
Car number 2 was dealing with a mismatched convertor and I expect more once the new convertor is installed.
To be fair car #2 has a new XFI and was still being dialed in when the convertor broke.
Car #2 should make a lot more power turned up. Similar combo to my street car. I know you won't be able to go this high with the 92/alky but FWIW I've had mine to 30# . That's where the big power is with the 6765 but that's also tempting fate with a stock block and rotating assembly.
I agree, I will retest it once the new PTC convertor is installed,keeping it around 25 on pump gas.
Though we do plan to hit the track with some C16 and turn it up eventually, it is their first GN.
I has an appointment for a cage and frame notch though,can't hit the track until this is done.
Similar threads
