slimtastic
yea dude...I rock
- Joined
- Aug 9, 2002
- Messages
- 741
hey all im looking to sell my TA-6676 presicion turbo as i switched to a billet 6262 ive had this unit for a couple years on a shelf so its got well under 4000 miles. always ran with a blow off valve the bearings are super tight still, no shaftplay what so ever this is a drop in unit! (presicion makes a killer turbo)
TA-6676 P/trim journal bearing
.63 a.r. housing ported wasegate hole, ceramic coated then high temp painted by polydyn in houston tx
comes with a 4 inch inlet bell but i can give you an extra 3 inch inlet bell for the untimate "stock look", you'll have to port match it though.
does not come with wastegate actuator
this thing is a top end/redline monster!
700$ shipped obo
also selling a modified passenger side manifold thats had a external wastegate provision added (specificly for a tial MVS wastegate). this external wastegate provision was optimally placed for addressing boost creep issues and prefessionally tig welded
after all work was performed the manifold was also ceramic coated by polydyn coatings in houston tx
does not come with the wastegate or screamer pipe
220$ shipped
TA-6676 P/trim journal bearing
.63 a.r. housing ported wasegate hole, ceramic coated then high temp painted by polydyn in houston tx
comes with a 4 inch inlet bell but i can give you an extra 3 inch inlet bell for the untimate "stock look", you'll have to port match it though.
does not come with wastegate actuator
this thing is a top end/redline monster!
700$ shipped obo



also selling a modified passenger side manifold thats had a external wastegate provision added (specificly for a tial MVS wastegate). this external wastegate provision was optimally placed for addressing boost creep issues and prefessionally tig welded
after all work was performed the manifold was also ceramic coated by polydyn coatings in houston tx
does not come with the wastegate or screamer pipe
220$ shipped
