Stock Gauge Cluster lights

[Haynesie]

Hi Everyone,

I recently replaced the flexible circuit board on my gauge cluster, and realized that the pictures I took showing the different bulb sockets (black and grays) were not clear enough to see which sockets belonged in which holes.

Does it matter which color sockets go in which holes, or can I just pop them all in and it will be fine regardless of the socket.

If it does matter, can anyone share a picture to help me put the right bulbs/sockets in the right holes? If it matters, I have the flex board from caspers with the resistor installed to compensate for a bad volts light.

Thanks,
Jason

 

[SHADOWII]

John Spina of Caspers, can provide that info for you. He had a place for instructions on his old site, but I don't seem to be able to find it on his new site. I'm thinking they are specific and I can't find the pic he posted before.

 

[GNVenom]

Here's the layout for a digital dash:
http://www.installationinstructions.com/FYI/digitaldash.pdf

Analog is similar, but has extra general lighting bulbs.

 

[GNVenom]

Found it, here's the analog layout:

http://www.installationinstructions.com/FYI/analog_dash_lighting.pdf

 

[SHADOWII]

Thanks John!