HI EVERYBODY !
COULD YOU PLEASE SEND ME
YOUR COMMENTS AND/OR SUGGESTIONS ABOUT THIS
SETUP ?
FOR INSTANCE, I DONT KNOW WHAT IS A GOOD
CAME FOR THIS SETUP. ARE STALL RPM OK ?,
ARE FLOW OF HEAD OK ? MAYBE SOME COMPONANTES ARE
NOT APPROPRIATE FOR THIS OR THAT.
-FORD POWERSTROKE FRT MT INTERCOOLER
3" INLET AND OUTLET
-62 mm TROTEL BODY MATCHED TO THE INTAKE, WING WELD ON TOP
OF UPPER INTAKE, ALL EGR DELETED AND 1/2" SPACER BETWEEN
UPPER / LOWER INT.
-TURBO PT70 WITH .83 HOUSING 3 BOLTS AND 4" INLET
-TURBONETICS RACE GATE AND BLOWOFF VALVE
-PORTED AND MATCHED STOCK HEADERS
-3-1/2" DOWN PIPE WITH DUAL 3" EXHAUST
-PORTED STOCK HEAD, STOCK GASKET, STUD KIT AND
STOCK VALVE INT. / EXH.
FLOW OF INTAKE RUNNER
57 CFM @ 0.100
111 CFM @ 0.200
158 CFM @ 0.300
172 CFM @ 0.400
176 CFM @ 0.450
178 CFM @ 0.500
181 CFM @ 0.550
I DONT HAVE EXHAUST FLOW BUT IT IS POLISH
-KENNY BELL ROLLER ROCKER 1.55 RATIO
-TRW FORGED 0.30 OVER STD COMPRESSION
-STD CRANK
-STEEL CAP
-MAIN CAP GIRDLE
-CAME FEW SUGGESTIONS ? ? ? ? (HYD. FLAT TAPPET IF IT'S POSSIBLE)
-SIEMENS 72 Lbs/H
-FUEL PUMP 2 X 216 BOSCH ON LINE (53-58 GPH @ 72 PSIG)
WITH 1/2" DIA. FUEL LINE 3/8" RETURN
-ART CARR 9 INCHES STALL AT 3500 RPM
-RED 108 RACE CHIP
-4 INCHES MASS AIR FLOW
WEIGHT OF THE CAR 3600 LBS WITH DRIVER
TARGET 9.99 ON GOOD AIR DAY
ALL YOUR COMMENTS WOULD BE VERY MUCH APPRECIATED !
THANKS A LOT.
CLAUDE POISSON QUEBEC CITY
COULD YOU PLEASE SEND ME
YOUR COMMENTS AND/OR SUGGESTIONS ABOUT THIS
SETUP ?
FOR INSTANCE, I DONT KNOW WHAT IS A GOOD
CAME FOR THIS SETUP. ARE STALL RPM OK ?,
ARE FLOW OF HEAD OK ? MAYBE SOME COMPONANTES ARE
NOT APPROPRIATE FOR THIS OR THAT.
-FORD POWERSTROKE FRT MT INTERCOOLER
3" INLET AND OUTLET
-62 mm TROTEL BODY MATCHED TO THE INTAKE, WING WELD ON TOP
OF UPPER INTAKE, ALL EGR DELETED AND 1/2" SPACER BETWEEN
UPPER / LOWER INT.
-TURBO PT70 WITH .83 HOUSING 3 BOLTS AND 4" INLET
-TURBONETICS RACE GATE AND BLOWOFF VALVE
-PORTED AND MATCHED STOCK HEADERS
-3-1/2" DOWN PIPE WITH DUAL 3" EXHAUST
-PORTED STOCK HEAD, STOCK GASKET, STUD KIT AND
STOCK VALVE INT. / EXH.
FLOW OF INTAKE RUNNER
57 CFM @ 0.100
111 CFM @ 0.200
158 CFM @ 0.300
172 CFM @ 0.400
176 CFM @ 0.450
178 CFM @ 0.500
181 CFM @ 0.550
I DONT HAVE EXHAUST FLOW BUT IT IS POLISH
-KENNY BELL ROLLER ROCKER 1.55 RATIO
-TRW FORGED 0.30 OVER STD COMPRESSION
-STD CRANK
-STEEL CAP
-MAIN CAP GIRDLE
-CAME FEW SUGGESTIONS ? ? ? ? (HYD. FLAT TAPPET IF IT'S POSSIBLE)
-SIEMENS 72 Lbs/H
-FUEL PUMP 2 X 216 BOSCH ON LINE (53-58 GPH @ 72 PSIG)
WITH 1/2" DIA. FUEL LINE 3/8" RETURN
-ART CARR 9 INCHES STALL AT 3500 RPM
-RED 108 RACE CHIP
-4 INCHES MASS AIR FLOW
WEIGHT OF THE CAR 3600 LBS WITH DRIVER
TARGET 9.99 ON GOOD AIR DAY
ALL YOUR COMMENTS WOULD BE VERY MUCH APPRECIATED !
THANKS A LOT.
CLAUDE POISSON QUEBEC CITY
