TA60 w/stock waste gate

[86SS86LS]

Can a TA60 be used with a stock waste gate? I'm considering purchasing a used TA60 that is currently using an external wastegate. And will the TA60 pretty much bolt up in place of the stock turbo?

 

[SHADOWII]

Yep...

check your puck, to insure it closes over the bi-pass, and if you have the time. you might want to port your stock elbow to take advantage of the extra boost.

 

[SHADOWII]

Btw...

You don't list any mod's, but you probably should have a chip burned for the added air volume, so as not to lean out. Try Eric (turbotweak) for your chip. You will see a good all around performance increase w/o the need to replace h/g's. Remember to tune for no knock.

 

[86SS86LS]

You don't list any mod's, but you probably should have a chip burned for the added air volume, so as not to lean out. Try Eric (turbotweak) for your chip. You will see a good all around performance increase w/o the need to replace h/g's. Remember to tune for no knock.

I should have mentioned, it does have a 3" down pipe, 50 lb injectors, and a TT e85 chip.