TE-45a - BOOST... What is everyone running with there's? STREET/STRIP

[TurboTnZ06]

New best on the 45a 10.9 @ 126.9
Link to timeslip image

 

[BAGN]

I went 10.7's @ 123 with only 17 psi. .030 Stock Block,Ported M & A Heads, CPP streatched Stock Intercooler,FAST system & all the bolt-ons. 1.50 60ft.

 

[scot w.]

Ttt ,

 

[Blazer406]

I went 10.7's @ 123 with only 17 psi. .030 Stock Block,Ported M & A Heads, CPP streatched Stock Intercooler,FAST system & all the bolt-ons. 1.50 60ft.

TTT

What was the car weight?

 

[BAGN]

TTT

What was the car weight?

3550 w/Driver

 

[vacuum 6]

The 45 has a nice big sweet spot!

 

[Blazer406]

3550 w/Driver

Dad gum!!!! You are my hero.

Your heads/cam must flow/match real good.

Very impressive sir. You want to come rub on my engine before I put my 45A on?

Are you coming to the nats?

 

[Chris McDade]

He went 10.70's @17lbs of boost because he builds motors with higher compression. Different strokes for different folks!!!!

I went 10.44@129 @30lbs boost with my 45A .85 3 bolt exhaust housing.

 

[Blazer406]

He went 10.70's @17lbs of boost because he builds motors with higher compression. Different strokes for different folks!!!!

I went 10.44@129 @30lbs boost with my 45A .85 3 bolt exhaust housing.

I'm very impressed with this turbo.... I'm sure your combo complemented it well.... but that turbo seems to run at least high 10's with an un-optomised combo...... that's bad @ss.

10.44 is bad @ss too.

I'm hoping on 10.80's with 21 -23 psi or so on pump gas and alky with some ported heads and 60's on smallish MT drag radials. I might have to buy an 83 housing.. to kill a little bottom end with the small tires..... but I really don't want to... hopefully I will have mine going shortly after the nats.

 

[Bobs rare 6]

I ran 10.97 on 23#s, 91 pump and alky. And that was shifting to 4th accidently! Later, Bob.

 

[Chris McDade]

It's a very nice turbo. I'm having one built right now for my dad's car. It's a
45A GTQ 3 bolt .85 housig.