Th400

[Wht87T]

Chris

Thanks for the info, I'll give you guys a call for more info.

 

[lazaris]

Art,

Yes Shubeck has hyd rollers as well. The ones from Comp are the Pro Magnums. I believe they raise rpm potential to 7000rpm. Theres a guy on here that sells them for less than Comp.

 

[TurboDiverArt]

Originally posted by lazaris
Art,

Yes Shubeck has hyd rollers as well. The ones from Comp are the Pro Magnums. I believe they raise rpm potential to 7000rpm. Theres a guy on here that sells them for less than Comp.

WOW - 7000 RPM's from a HYD. Roller lifter is really good. Is there any limit on ramp-up speed (lift vs. duration) for these lifters? HYD lifters typically are strapped with the problem of bottoming out with an aggressive cam profile.

 

[lazaris]

I dont if there are ramp speed limits. Maybe try calling Comp. I have the std hyd rollers in now and have shifted to 6500 with no probs. I wouldnt go further. I also have good springs in there. Next build I'm going to try the Pro Magnums with a bit more cam.

 

[TurboDiverArt]

Originally posted by lazaris
I dont if there are ramp speed limits. Maybe try calling Comp. I have the std hyd rollers in now and have shifted to 6500 with no probs. I wouldnt go further. I also have good springs in there. Next build I'm going to try the Pro Magnums with a bit more cam.

Cool. Me being old fashioned (and the fact that my motor is already complete) I'll wait until the jury is done deliberating on them. Let them get tested a few times to see how well they fair. Does look really promising though!

 

[chris718]

hey art are you roadworthy yet ?just checking in to see where your at .give a call.

 

[TurboDiverArt]

Originally posted by chris718
hey art are you roadworthy yet ?just checking in to see where your at .give a call.

Hey Chris,

Motor is back but not in the car. Hoping to get the motor and trans in the car in the next week or so.

I'll try to give you a call tomorrow.
Art.