You can type here any text you want

Thinking about selling my car

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

87_we4

turbo tom
Joined
Apr 18, 2010
Messages
384
Like title says. Thinking about selling my car to pay off other things. Mods in signature. Motor has 1100 miles on build. Turbo, injectors, fuel pump, hotwire, and Alky have less than 200 miles. Torque converter has about 800 miles on it. Car has slight rust in rear 1/4 panels and drivers front floor pan. I have a pair of 1/4 panels and sections of floor from a 86 gn for patch panels. What would be a good asking price? I have a lot of money tied up in the drive train.

Posted from the TurboBuick.Com mobile app
 

Attachments

  • 1372643876426.jpg
    1372643876426.jpg
    84.2 KB · Views: 304
  • 1372643892027.jpg
    1372643892027.jpg
    77.5 KB · Views: 312
  • 1372643911910.jpg
    1372643911910.jpg
    97.4 KB · Views: 313
  • 1372643982093.jpg
    1372643982093.jpg
    60.8 KB · Views: 300
  • 1372644020503.jpg
    1372644020503.jpg
    54.5 KB · Views: 315
I'm in mid Missouri. I have around $18000 in to the car. $10k of that is in the performance parts that are all new. I'm looking for offers right now

Posted from the TurboBuick.Com mobile app
 
Rundown on the car for those who can't see signature. 87 we4, .020 block, dual row timing chain, ported heads intake dog hose and throttle body, rjc power plate, comp 210/215 cam, morel rollers, harland sharp roller rockers. Pac beehive springs, new front cover/ oil pump, new water pump, ptc 10" 3200 nl stall, shift kit, billet servo, power logger, scan master, turbo tweak 6.1, lc1 wideband, lt1 mad t translator, racetronix 340lph pump and sender, race tronix hotwire, 80# injectors, -6 return fuel line, accufab regulator, precision 6266 billet turbo, 25 psi boost, Alky control single nozzle, case v4 slic, 3"thdp, cutout, 3" pypes race pro, 3 row aluminum race radiator, b&m trans cooler, AC/heat delete, radio/hvac delete, south side machine lift arms, koni adjustable shocks, eibach pro kit springs, rear seat x brace, 275/50 bfg drag radials, aluminum bumper supports, driveshaft loop, that covers most of everything. Haven't had it to the track but I'm guessing high 10 to low 11

Posted from the TurboBuick.Com mobile app
 
Posted from the TurboBuick.Com mobile app
 

Attachments

  • 1372716518239.jpg
    1372716518239.jpg
    75.1 KB · Views: 173
  • 1372716530472.jpg
    1372716530472.jpg
    70.2 KB · Views: 173
  • 1372716542178.jpg
    1372716542178.jpg
    67.8 KB · Views: 181
Where in mid Mo are you? I'm in the market...

I recently sold my 87 T to a guy in Macon for a little more than you say you have in mods, it didn't have any body rot, it had working a/c and heat and a working radio, nice paint and nice interior, and had all the mods in my sig that I knew was on it plus more that were done before my ownership.
 
If you move it please post up what you got if you dont mind......I would be very curious to see what your car brings. Unfortunately we will never get out of our cars for what we have in them....

How many miles on the chassis?

I have seen cars with similar mods as your under 100k on the clock and absolutely cherry, for what you have in your car.

I have a very similar combo built...fully built trans all suspension the car has 89k miles on it and my paint is 7 outta 10 interior is 9 outta 10 I Have had thoughts of selling it but I think it would only bring $15.....if I put a fresh paint job then maybe $17-$18k

Best of luck to you.
 
My car has 49k on the chassis. Motor was stock when I got it besides 42# injectors and a pt51 turbo.

Posted from the TurboBuick.Com mobile app
 
My advice would be to fix the rust and then list it, you will get more out of it. A 49,xxx mile WE4 is a desirable car. Good luck to you !! I have well over 40k in my car and there is no way in hell I could get that out of my car and it has about a $10k paint job on it that was finished in January.

Bryan
 
Back
Top