Tony Gomes 7.95@ 175!!!!!!!!

[Dusty Bradford]

Big Congrats Tony.

I did hear he was on 295/65 radials. 60' foot was 1.34 and the 1/8 was 5.17 at 140+.

Dave Fiscus went 1.27 60' but had some other issues, still running 8.26 or so while being down over 6mph on the big end.

As you can see, once Tony get's his 60's worked down to the range Fiscus is in, 7.80's are very possible with the 88mm at 3400+ lbs

 

[howdies86]

7.95

Big Congrats Tony.

I did hear he was on 295/65 radials. 60' foot was 1.34 and the 1/8 was 5.17 at 140+.

Dave Fiscus went 1.27 60' but had some other issues, still running 8.26 or so while being down over 6mph on the big end.

As you can see, once Tony get's his 60's worked down to the range Fiscus is in, 7.80's are very possible with the 88mm at 3400+ lbs

I saw both these amazing passess!!! Please tell me someone got them on video!?

 

[Whut]

you forgot 1 important factor in the equation. it should read RPE, XFI, PTC, Hartline. What a combo.

Haha yeah, Cal can work some magic!

 

[SGRIM]

Big Congrats Tony.

I did hear he was on 295/65 radials. 60' foot was 1.34 and the 1/8 was 5.17 at 140+.

Dave Fiscus went 1.27 60' but had some other issues, still running 8.26 or so while being down over 6mph on the big end.

As you can see, once Tony get's his 60's worked down to the range Fiscus is in, 7.80's are very possible with the 88mm at 3400+ lbs

That is flat amazing... Serious V6 HP!!!

 

[quickt]

Congrats Tony and Crew.

 

[HighPSI]

Congratulations Mr Gomez!! This 7 second pass has been a long time in the making. It's amazing how much hp that RPE mill is making. It's probably the most powerful single turbo Buick EVER, and with just an 88mm
Great job by Lonnie on the trans and Dusty with the PTE convertor, too.
I can't wait to see you and Dave run at Reynold's.

PS: Don't forget to call GM High Tech and update the article :smile:

 

[John Wilde]

Congratulations Mr Gomez!! This 7 second pass has been a long time in the making. It's amazing how much hp that RPE mill is making. It's probably the most powerful single turbo Buick EVER, and with just an 88mm
Great job by Lonnie on the trans and Dusty with the PTE convertor, too.
I can't wait to see you and Dave run at Reynold's.

PS: Don't forget to call GM High Tech and update the article :smile:

PTC and check your PM please!

 

[86brick]

Big Congrats Tony.

I did hear he was on 295/65 radials. 60' foot was 1.34 and the 1/8 was 5.17 at 140+.

Dave Fiscus went 1.27 60' but had some other issues, still running 8.26 or so while being down over 6mph on the big end.

As you can see, once Tony get's his 60's worked down to the range Fiscus is in, 7.80's are very possible with the 88mm at 3400+ lbs

WOW, so the car was basically in full TSO trim at 3400+lbs with an 88mm turbo!!? That is super impressive and I assume this 88mm turbo is one of the newer Billet ProMod units from Precision?? Tony is da man!

 

[D's GN]

Congrats! That has to be close to 1400+ HP at 3400#. Props to RPE and TA for a killer motor.

 

[HighPSI]

I should let Tony post this......The car was 100% TSO legal and was teched before and after the pass. The car was over the 3450# minimum weight.

 

[gnxtc2]

I should let Tony post this......The car was 100% TSO legal and was teched before and after the pass. The car was over the 3450# minimum weight.

Mr. Hartline you need to update your signature

Billy T.
gnxtc2@aol.com

 

[baadgn]

Congrats Tony!!! This is the first stock suspension V6 G-body/Grand National in the 7's and "if" he was on a Drag Radial this would also be the first V6 G-body/Grand National in the 7's on Radials. Was this at the Norwalk event or elsewhere?? Please somebody post up some details and I hope somebody got it on video.

I have video how in the heck do i get it on here its easier to go 7s :wink:

 

[gnxtc2]

Upload it onto YouTube then post the link to YouTube.

Billy T.
gnxtc2@aol.com

 

[Underboost]

I have video how in the heck do i get it on here its easier to go 7s :wink:

PM Sent

 

[86brick]

I have video how in the heck do i get it on here its easier to go 7s :wink:

If you can email the file to me I can put it on Youtube or you could probably just upload it to Youtube as Billy said.

 

[V6 Beast]

I have video how in the heck do i get it on here its easier to go 7s :wink:

If you send it to me I will be glad to host it up for you. I can convert it from tape to video file too if you need.

Sully

 

[baadgn]

If you can email the file to me I can put it on Youtube or you could probably just upload it to Youtube as Billy said.

The video file I have is over 10 mb so i cant send thru e-mail and you tube is going thru repairs right now

 

[86brick]

The video file I have is over 10 mb so i cant send thru e-mail and you tube is going thru repairs right now

Damn, unfortunately right now I got nowhere to host it, but maybe Sully can hook you up.

 

[V6 Beast]

The video file I have is over 10 mb so i cant send thru e-mail and you tube is going thru repairs right now

If youtube isn't fixed tomorrow, I can set you up an email address you can send 25 MB messages with or give you a call and walk you through uploading it to my server directly.

 

[GNBRETT]

Congrats Tony.