TR6 mounting

[turboclam]

Anyone have a pic of mounting a TR6 on the inner fender?

Where do you get the extension harness?

 

[jmendlik]

Caspers Electronincs or Bob Bailey will make you one-they will want to know what length you want them in..

 

[turboclam]

Thanks.

Anyone making a bracket so it can be mounted in stock location using a Champion race intake?

 

[pacecarta]

long cc1 harness 48" from caspers, i extended the supplied TR6 coil harness wires but turbobob was also offering them
the mount is just some simple bracket material from a trans cooler kit , and a couple bends on a vise attached to the existing studs on bottom of tr6 box

 

[pacecarta]

if you plan to mount the coil bracket with the race manifold you will need to set the coilpack back a little and notch the bracket near the rear bolt of the plenum and slotting the attaching ears will help
using cilpack as a guide i drilled and then nutted 4 long bolts through the bracket creating four studs to set the coilpack onto so i could pull the coil in the future with out having to play with the bracket mounting

 

[X Ray]

If you like the location in front of the Washer Bottle you can make something like this.....
http://www.turbobuick.com/forums/threads/maf-translator-mounting-bracket.393241/#post-3189090