Turbo id and inlet bell?????

[ghall]

I have an idea but can someone tell me what is supposed to be connected to the opening I have circled on the inlet bell?

Also wondering if someone can help id this turbo--465625-5002 and 3906-T601. Once again I have an idea just trying to confirm.

Thanks for any help.

Geoff

 

[mikestertwo]

It connects to a vent tube that goes to the front of the right valve cover.

 

[zacks gn]

Buy a rubber cap for it .they used to sell a kit for it to keep oil out of intercooler .

 

[psycho6cyl]

Buy a rubber cap for it .they used to sell a kit for it to keep oil out of intercooler .

.and buy a small filter to.replace the breather on the valve cover on pass side..kirbans sells.the kit..

 

[zacks gn]

Looks like a stock turbo .

 

[626gn]

I've got one of those caps lying around somewhere. Let me know if you need one.

 

[ghall]

Thanks for the great info guys

626gn---thanks for the offer but I have the proper hardware to get it re--installed

The turbo is not a "stock" unit, if anyone has anymore input on what they think it is---let's hear it.


Geoff

 

[psycho6cyl]

Could be a ta 49 or ive heard ppl getting I believe a bigger wheels in a stock housing but you wont know till theyre measured.

 

[1fastcobra]

Take a pic of the compressor wheel and post it .


Posted from the TurboBuick.Com mobile app

 

[bison]

Thanks for the great info guys

626gn---thanks for the offer but I have the proper hardware to get it re--installed

The turbo is not a "stock" unit, if anyone has anymore input on what they think it is---let's hear it.


Geoff

In the picture it looks stock to me. Might have some other wheels in it but it's stock appearing in the pic


Posted from the TurboBuick.Com mobile app