Turbo oil drain line

[lrayzer]

The flow will only be as good as the smallest orifice. With a -8 on bottom of turbo and a -8 on the block, putting a -10 line between them is not gonna help.

No kidding , the restriction is the fitting and drain, I was looking at 30 degree push loks and the -10 AN billet drain fitting, not the 1/2" pipe thread.
All was well until the T66 pushed its way into things, now the factory line leaks. and yes the block is 1/2" MPT, just remove the brass adapter.

 

[sackracing]

Using a -10 on the bottom of the turbo isn't going to make a difference either, still feeding to a -8 hole on the block. It'll just be a funnel.
I'm using -8 hose and fittings on a 6768HPQ, no issues.

 

[lrayzer]

If nothing else, -8 fittings will be cheaper and take up less room, need to scrounge my bins.

 

[slo-joe55]

Thanks guys for the feedback. I believe i will give this Gbody drain line a try.

 

[lrayzer]

Yes that will ne the easy route for sure, I spent much more to make mine up

 

[BobbyBuick]

i could make more if there is a demand i need to make 20 .I am currently out of stock

 

[11.20n1320]

Please make more !!!

 

[Hahny]

i could make more if there is a demand i need to make 20 .I am currently out of stock View attachment 332925

Nice looking return line.

 

[SpeedRacerX]

i could make more if there is a demand i need to make 20 .I am currently out of stock View attachment 332925

I'm in for 1. Please make some...

Sent from my SM-G965U using Tapatalk

 

[BobbyBuick]

Ill have some ready to ship in 2 weeks Price is 80.00 Delivered to your Door in the upper 48
Paypal is bobbybuick@sbcglobal.net if you need one
Will update when complete
Thanks Bob

 

[SpeedRacerX]

Ill have some ready to ship in 2 weeks Price is 80.00 Delivered to your Door in the upper 48
Paypal is bobbybuick@sbcglobal.net if you need one
Will update when complete
Thanks Bob

PayPal sent. I'll PM you my address. Thanks for doing this. Merry Christmas.

Sent from my SM-G965U using Tapatalk

 

[BobbyBuick]

You didnt have to prepay i have all the materials ordered and will keep you posted when complete Thank you

 

[TurboTGuy]

Payment sent for one!

 

[BobbyBuick]

Got it thanks
You guys must thrust me Huh?

 

[jason mizel]

Count me in for one

 

[BobbyBuick]

Guy and SpeedracerX. I had enough fittings to make up 3 Drains, your drains are in the mail.
I do have one more I Could Ship Now

bobbybuick@sbcglobal.net

 

[BobbyBuick]

Gone ill have more in a week or so

 

[BobbyBuick]

All but 4 are spoken for will update when fittings come They are all built just waiting on fittings

 

[Dhos1]

Damn, wish I would have seen this when I had my turbo out—these look great!!

 

[SpeedRacerX]

Got mine today. Looks really nice. Thank you!

Sent from my SM-G965U using Tapatalk