Turbo what is it??

[GNX 120]

Got this turbo with a lot of buick parts I purchased, not sure what it is it says air research .95 on the compressor side and nothing on the exhaust side. Has a 4 bolt flange. best I can measure the compressor side is about 73 to 76 mm and the exhaust side is 93 to 96 mm. Any help with this would be great. THANX KERRY

 

[RUQWKNF]

To be perfectly honest, it's going to almost 100% impossible to properly ID it without full blown Inducer and Exducer measurements of the wheels. Pictures really help as well. If possible, pop the compressor cover and turbine housing off the turbo and measure the wheels. It would greatly help us get a better idea what you have.

You can use this picture to see where to measure the wheels.

Hope this helps.

Patrick

 

[GNX 120]

Turbo what is it

Thanx I will remove and measure. Here are some pic's.

 

[GNX 120]

OK took it apart few pic's and measured the best I could. Don't really know how to read the veriner??? if thats what you call it. Here we go compressor side base of wheel is 4 3/16" or 4.250 if that is right. tip is 3 3/16 or 3.150 exhaust is 4 5/16 or 4.310 at the base and 3 3/4 or 3.884 at the tip. THANX KERRY

 

[GNX 120]

Turbo?????

To be perfectly honest, it's going to almost 100% impossible to properly ID it without full blown Inducer and Exducer measurements of the wheels. Pictures really help as well. If possible, pop the compressor cover and turbine housing off the turbo and measure the wheels. It would greatly help us get a better idea what you have.

You can use this picture to see where to measure the wheels.

Hope this helps.

Patrick

OK took it apart few pic's and measured the best I could. Don't really know how to read the veriner??? if thats what you call it. Here we go compressor side base of wheel is 4 3/16" or 4.250 if that is right. tip is 3 3/16 or 3.150 exhaust is 4 5/16 or 4.310 at the base and 3 3/4 or 3.884 at the tip. THANX KERRY

 

[84BuickGNYorkPA]

The calculations are only as accurate as the given values, example:
Compressor side numbers

4 3/16" = 4.1875" = 106.36 mm
4.25" = 107.95 mm
3 3/16" = 3.1875 = 80.96 mm
3.15" = 80.01 mm

Either way this is a big turbo...!!!
In to mm (inches to millimeters) and mm to in (millimetres to inches) Online Calculator - Converter / Conversion Chart / Table

Exhaust Side

4 5/16" = 4.3125" = 109.54 mm
3 3/4" = 3.750" = 95.25 mm
3.884" = 98.65 mm

Conclusion is ...... I have no idea..... way to big for my Buick!

Chuck

 

[porsches4lunch]

The calculations are only as accurate as the given values, example:
Compressor side numbers

4 3/16" = 4.1875" = 106.36 mm
4.25" = 107.95 mm
3 3/16" = 3.1875 = 80.96 mm
3.15" = 80.01 mm

Either way this is a big turbo...!!!
In to mm (inches to millimeters) and mm to in (millimetres to inches) Online Calculator - Converter / Conversion Chart / Table

Exhaust Side

4 5/16" = 4.3125" = 109.54 mm
3 3/4" = 3.750" = 95.25 mm
3.884" = 98.65 mm

Conclusion is ...... I have no idea..... way to big for my Buick!

Chuck

Garrett TV81 used on detroit desiel motors, Large FREAME T6 flange

 

[WINDMILL]

is the turbo for sale let me know thanks craig..

 

[GNX 120]

Not sure what it is worth?? It is clean and tight, just slight shaft play. Make me a fair offer and I will consider it. #774 696 3585 THANX KERRY

 

[WINDMILL]

i have a friend thats has one on a sbc, he looking for another..he told me to see what your looking to get for it...

 

[GNX 120]

No clue make fair offer!

 

[WINDMILL]

i'll give him your number....

 

[GNX 120]

I asked a few people about price they said about $400 to $450 ?? Does that sound fair anyone ? THANX KERRY

 

[WINDMILL]

kerry,, i dont want it,, it was another guy thats asking about it,, i will tell him