Turbodave231's Install of the Bailey Engineering TR6 Ignition Module

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

turbodave231

Moderator
Joined
May 24, 2001
Messages
2,301
Here is a quick Video I did of the Bailey Engineering TR6 Ignition module. I'm looking forward to my next track day to put it through the paces.

I'll report back with performance and my impressions.

 
Alot of cool stuff under that hood dave- id like to know alittle bit more about your fuel system, i have to redo mine when i get my s2 motor back from the machine shop-keep up the good work!
 
Thanks for the compliments on the car.

I really want to report about the performance. I went to Norwalk to the Buick Raceday this past weekend. I have been chasing a high speed/high boost misfire for over a year and a half with the stock coil pack and module. I needed to close up the plug gaps below .030 and needed a fresh new coil pack to make the engine pull clean.

The Bailey TR6 ignition system eliminated my ignition problems. I am now at .040 plug gaps and the engine pulls clean to 7400 RPM. I may try even wider gaps yet. It took me awhile to dial in the 2 step and get the launch boost where I needed it, but the car is now back to 1.3X 60' times and running great. I was running easy 9.80's and have only had it up to 21-23 psi boost so far. Unfortunately, I had transmission issues that kept me from turning up the wick. I will be installing my spare trans tomorrow and may be testing again this weekend. Stay tuned for more updates and better quarter mile times!!
 
Neat!!....Crap!! Now something else i want,be hard to foul a cylinder with a coil per...(I'm having fun adding traction control,My yokes to big for F.A.S.T. senor's,they only offer two sizes..8^(..)
 
Back
Top