Turbonetics 6465 Billet F1 turbo

[viperman5]

Turbonetics 64mm compressor, 65mm exhaust, p-trim, ball bearing.

Original owner, less than 4000 miles, exhaust housing ceramic coated, no actuator, wastegate hole has been ported for external DP.

$850 shipped

 

[3.8L V-8 eater]

Were you using an oversized downpipe puck??

 

[viperman5]

No, I was using an external gated downpipe. The hole is port match my Cotton downpipe. For an internal setup, a RJC block off plate would be required.

 

[3.8L V-8 eater]

No, I was using an external gated downpipe. The hole is port match my Cotton downpipe. For an internal setup, a RJC block off plate would be required.

Sorry, I was asking if the puck in your internal stock style downpipe was a larger one or standard size

 

[Sweet6]

I looked at the ad He is running an external gate and the wastegate hole is too big for even an a larger puck

 

[Sweet6]

http://turbobuick.com/threads/3-bolt-turbo-gasket-and-exhaust-to-downpipe-plate.448439/

Use a plate like this is you wanted to use this turbo with a internal gate. Just need to make a hole in the plate.

 

[viperman5]

$750 shipped

 

[dynoman]

That oversized wastegate hole is no big deal . My exact same turbo's wastegate hole was slightly misaligned for my puck and fixed it with a plate like Sweet6 suggested . I got my blank from Bison and put the hole exactly where it needed to be . Make the hole no larger than .9" to start or you may not be able to build boost over 24 psi , and that's another story !
Nice turbo , I love mine . GLWS , Sam

 

[Ttype6]

Is this turbo still available?

 

[viperman5]

Yes

 

[viperman5]

TTT

 

[Ttype6]

This turbo will support 800 hp. Because of the small diameter and light weight of the compressor wheel,it will spool fast.

 

[Dirty*6]

Still have the turbo for sale?

 

[viperman5]

Yes, turbo is still for sale.

 

[Dirty*6]

How big are the inlet and outlet?

 

[viperman5]

It is a S Cover, 4" inlet, 2.5" outlet.