chevybelly
New Member
- Joined
- Oct 1, 2009
- Messages
- 7
I have a used 200-4r from a MCSS. It came with the original TV cable. I mated it to a 350 sbc, Weiand intake, holley 600. I have the geometry corrector for Holley carbs from summit. Im using the chrome universal TV bracket.
My question is after I push the button in and preload the inner plastic cable, I hook the clip end if the cable to the TV pin on the bracket, open the throttle to WOT and im not hearing any clicks from the preloaded plastic cable. It pulls out about 2 inches, but only when you push the button in and pull it out. Do I have to drop the pan and check the location of the plunger?
My question is after I push the button in and preload the inner plastic cable, I hook the clip end if the cable to the TV pin on the bracket, open the throttle to WOT and im not hearing any clicks from the preloaded plastic cable. It pulls out about 2 inches, but only when you push the button in and pull it out. Do I have to drop the pan and check the location of the plunger?