Vig Converter, Stage II, ds loop, brf trans

[m6z]

I have a Vigilante 9.5 Single Disc lock up converter. Aprox. 2800 stall. Not sure on the miles, since it was in my car when I bought it. Trans. had some clutch in the pan so it should be gone through.

$575 and I'll send it back to Precision and have it inspected and restalled to your combo or $350 shipped as is. It was around $150 last time I checked on getting it checked and restalled @ Precision.

These are 729.99 from Full Throttle

BRF trans just removed from my car. Worked, but wouldn't shift if boost was turned up. Has a different servo and possible other upgrade parts, but not
sure. $300 pick up only! Had a couple of plastic peices in the pan, not sure what...

Stage 2 topend off of a bush car. Make me a offer, I don't forsee me using this stuff anytime soon. Picts in thead below.

http://www.turbobuick.com/forums/parts-sale/181844-stage-2-bush-top-end.html

Kirban drive shaft loop. New! will not work with 3.5" driveshaft. $30 shipped

Will trade or partial trade for F.A.S.T. XFI system or 60 lb injectors and data logging software. All parts are located in Tulsa OK, except transmission which is currently located in Parsons, KS, but can be picked up in Tulsa per request.

Thanks for your time,
Doug Schmid
dougchmid2000@yahoo.com
620-423-4291

 

[Jay Nesbitt]

PM Sent on Tranny

thanks,
Jay

 

[benoitthegr8]

PM sent

 

[Michael McCoy]

Hey Benoit do you need directions to the post office, FedEx, or UPS?

 

[brian]

Doug,
I will take the loop.

Good price on the converter!

Brian

 

[benoitthegr8]

Do you need directions to use your phone and call????

Hey Benoit do you need directions to the post office, FedEx, or UPS?

 

[m6z]

ds loop and converter are sold

 

[brian]

Payment sent!

Thanks, Doug...
Brian

 

[m6z]

Here's what's left vvvvv

BRF trans just removed from my car. Worked, but wouldn't shift if boost was turned up. Has a different servo and possible other upgrade parts, but not
sure. $300 pick up only! Had a couple of plastic peices in the pan, not sure what...

Stage 2 topend off of a bush car. Make me a offer, I don't forsee me using this stuff anytime soon. Picts in thead below. $1,300 shipped

http://www.turbobuick.com/forums/parts-sale/181844-stage-2-bush-top-end.html

Will trade or partial trade for F.A.S.T. XFI system or 60 lb injectors and data logging software. All parts are located in Tulsa OK, except transmission which is currently located in Parsons, KS, but can be picked up in Tulsa per request.

Thanks for your time,
Doug Schmid
dougchmid2000@yahoo.com
620-423-4291[/QUOTE]

Also have .060 over 468 going togeather with stock rods with arp bolts, stock cast crank, and probe forged pistons. Will yeild 9.5:1-10:1 with a 118 cc open chamber head < Not sure what its worth, I've got about a grand in it. Also have a set of the good open chamber oval ports. "Not ran since freshend"

"NEW" rebuilt Kajunjon 68 M21 Muncie 4 speed. Never ran. looks brand new!
$1000.00 + actual shipping. < this is so clean its been sitting in my closet. lol.

I just purched a 01 z06 and am comming to the realization that I just don't have the space to be putting togeather a bb/4-speed car and/or a stage 2 car. 3 cars and one garage space just isn't working.....

Help me out guys!
Doug

 

[GNsnake]

$225 for a restall from Precision. Talked to them about 2 weeks ago.

 

[m6z]

$225 for a restall from Precision. Talked to them about 2 weeks ago.

Good to know. I called about 6mo. ago and they told me $150 and shipping.

 

[m6z]

Trans has been sold. Going to start a new thread with some better picts of the stage parts.

Thanks,
Doug