Wanted 02 bung plug

[ALVAROG1983]

IM LOOKING TO SEE IF ANYONE HAS ONE LAYING AROUND I WOULD HATE TO ORDER ONE AND PAY $10.00 OR OVER ON SHIPPING ALONE . I TRIED MY LOCAL HARDWARE STORE AND NO LUCK SO IF ANYONE HAS ONE WOULD BE GREAT HELP THANKS.

 

[blackmonte]

I have one give me your address and I will send it to you.

 

[ALVAROG1983]

Pm sent

 

[3.8L V-8 eater]

I plugged mine off with a bad O2 sensor and hid the wire. To me that looks better than a plug and people think I have a wide band o2 in there which eventually I will. Just a thought.

 

[ALVAROG1983]

02

i plugged mine off with a bad o2 sensor and hid the wire. To me that looks better than a plug and people think i have a wide band o2 in there which eventually i will. Just a thought.

well i like the plug better but any how doesn't the wide band o2 have to be 6 to 8 inches away from the turbo im running xfi system don't know if that goes for all wide bands just my own 2 cents.

 

[3.8L V-8 eater]

Ya, they say it should be itleast a foot away. Most are welded in under the car near the end of the down pipe before the cat. Mine is about a foot away from turbo not the best spot, but will still work.

Should also mention that before I decided to plug mine with an 02 I went to Napa and they had a bolt to plug it with. I didn't buy it cause it would have stood up to high from the bunge, but it would have worked perfect to plug it off.

 

[ALVAROG1983]

Reply

ya, they say it should be itleast a foot away. Most are welded in under the car near the end of the down pipe before the cat. Mine is about a foot away from turbo not the best spot, but will still work.

Should also mention that before i decided to plug mine with an 02 i went to napa and they had a bolt to plug it with. I didn't buy it cause it would have stood up to high from the bunge, but it would have worked perfect to plug it off.

i get alot of different views on where to put the o2 me myself just putting on the down pipe away from the turbo and call a day.

 

[3.8L V-8 eater]

Make sure not to locate it in the down postion where condensation can ruin it!!! Have it up where it will stay dry!!!

 

[blackmonte]

I have mine at 10 o'clock right before the test pipe

 

[davinci50]

Go visit a local exhuast or mechanical shop ,they are usually laying around. They are supplied w/ catalytic convertors and not always needed.

 

[ALVAROG1983]

Maybe some one can send me some pics of where they put there 02 senser i was thinking of putting right before the drier at 10 o'clock.

 

[ALVAROG1983]

Meaning

make sure not to locate it in the down postion where condensation can ruin it!!! Have it up where it will stay dry!!!

up side down you mean.:d:d

 

[49-blues]

Anyone know what threads they are? is it 18mm?

 

[ALVAROG1983]

I BELIEVE THIS IS THE SIZE M18mm x 1.5mm thread