Wastegate Solenoid??

[mhelli1975]

The part I am talking about is the red plug that mounts on the passenger side valve cover. I was wondering if this part is necessary? I don"t have the filter on the one port and have nothing connected to the other port. I currently hace a turbonetics racegate with a turbonetics manual boost controller. Can I just unplug it, or is the computer still taking inputs from the sensor?

 

[salvageV6]

It depends upon the chip used whether or not you will get a code.

If you throw a code 31 I believe after removing it you can put a 100 ohm resistor at 2-10 watts rating accross the two wires or inside a weatherpack mating socket to simulate the solenoid.

Using the search feature should get you more information as well regarding it.

 

[CS99]

You might be able to just unplug it. If you have an aftermarket chip..it should be programmed to ignor it.

 

[gn4u2c]

I just plain took mine off no lights no codes on the scanmaster. Just unhook it and see what happens. Worst case the light comes on and you put it back.