salvageV6
Daily Driver
- Joined
- May 25, 2001
- Messages
- 20,965
Try a gallon of xylene to 4-5 gallons of pump gas.
It raises the octane to about 100 and xylene is the main injector cleaning agent.
Some use a dash of lube in it when mixing it up often to make some high octane street fuel, but I don't and use it once a year for injector cleaning.
Then again with all that $$ invested I'd have them flowed and double check the harness voltages and ohm it out if it were me.
Glad you got the direct scan going it's a good tool for data logging.
It raises the octane to about 100 and xylene is the main injector cleaning agent.
Some use a dash of lube in it when mixing it up often to make some high octane street fuel, but I don't and use it once a year for injector cleaning.
Then again with all that $$ invested I'd have them flowed and double check the harness voltages and ohm it out if it were me.
Glad you got the direct scan going it's a good tool for data logging.
