What Stall speed for 400 trans and my combo

[V8killR4U]

I wanted to get opionions on what stall speed i should go with.

90% street driven
109 block .030 over
GN1's
ported intake
CPT70 P trim turbo
224/224 cam ; rolllar
26" tall street tire; 28" at the track
all your supporting mods

I was told around 3600-3800 stall speed, I called a known converter company and they said a 4200 hundred stall, i thought it was too high?
What do you all think I would enjoy more. I probably will be stepping up the turbo soon to a 76.

 

[chris718]

3800 stall at 12 psi boost.

 

[V8killR4U]

I plan on running anywhere from 20-25 lbs minimum boost. What you think?

thanks in advance

3800 stall at 12 psi boost.

 

[chris718]

i understand but your not going to leave with that .the more boost the more stall youll get you want maximum coupling efficiency right around the stall speed and you want a usable rpm to move the car when you dump the transbrake.

 

[V8killR4U]

When it comes to this terminology and basic understanding its above my head. Now if driving my car 90% on the street i still want a 3800 stall? It'll still be fun to drive?

i understand but your not going to leave with that .the more boost the more stall youll get you want maximum coupling efficiency right around the stall speed and you want a usable rpm to move the car when you dump the transbrake.