Where can I buy a rear end re-build kit?

[spooledyou]

Was wondering where and what brand is preferred for a ring and pinion, bearings, seals an all. I run 16" 28" tall mt drag radials, with a ck200r4, also should I stick with 3.42s or go with something else. Mainly a street car, an out to the track only when it gets cold out so, not often. Any info would be appreciated , thank you.

 

[big reazon]

randys ring and pinion has never failed my family in our race cars or daily drivers.

 

[TurboTnZ06]

3.42's I got the richmond gear rebuild kit of shims bearings and seals and Strange gears from summit. Turns out the Strange gears that I got were made by Motive anyways. Of the two Strange/Motive gears for our cars, get the more expensive one, it was $189 I believe from summit and made in Italy- the cheaper one was made in China last I checked.

 

[novaderrik]

3.73 gears will give you the same final drive ratio with 28" tires that 3.42 gears will give you with the stock 26" tall tires..

 

[spooledyou]

Sorry can somone post up a link where I can purchase this.from , can't find it