Where to buy Fel Pro 1400s Quick

[Sweet6]

I just put on an ATR DS header with a thin coat of copper RTV. The thing leaks and the bolt are very tight. I am going to try a gasket. Do the chain auto part stores(Murray's, Auto Zone) carry these? Or where should I get them.

TIA

 

[terryk]

NAPA

 

[Mike Licht]

We have them in stock
888 293 7267
Ramchargers
MIke Licht

 

[Tow Man]

Did you clean around the ports? When I removed my stocker, there was a ring of carbon built up around the ports! I scraped the carbon off with a gasket scraper and finished up with some scotch brite.

I just installed the ATR DS header with a thin coat of ultra copper. I tightened it up and let sit overnight, then retightened again. It's been 2 days and no leaks!Just a suggestion if you can't find the gaskets.

Getting the dipstick back in was a huge PITA I should have clearanced the flange for the dip stick like the stock manifold

Good Luck