WTB 3.5 inch MAF to turbo plumbing and 3.5 outlet air filter

[TURBOPOWERED68]

My turbo is 3. inches on the inlet side and i want to up grade to 3.5 inch inlet from the MAF to the turbo.
I guess the parts needed would be
1- 3 X 3.5 45 degree angled coupling
2- straight pipe
3- 3.5 X 3.5 coupling
and
4- 3.5 outlet air filter.

Not looking for new stuff and i wouldn't have a problem with minor imperfections as long as it doesn't effect how the parts perform.

 

[jlat]

hello; I tried to make one up and it was a no go. No fab. of pipe just a angled silicon hose, a straight pc. of alum. pipe and a straight silicon hose. TR Customs has one he sells and that's about it.
I think someone should come up with a nice 1 pc.
The problem Tin Man was telling me is he's having problems finding that 3.5" stock.
IBBY

 

[TURBOPOWERED68]

i am looking to be a cheapass and buy something used. I did go to http://www.siliconeintakes.com/shopping_cart.php?osCsid=52ef1eab179a961bef76e18cfa738547
and put together a shopping list but i'll wait a few days and see if anyone has used set up.

 

[turbohh]

I may be able to help with 1, 2, and 3... let me look at the pile of hoses/pipes I have left over and see if stuff matches. I should know tomorrow, will post what I have.
Sincerely,
John A, Turbohh

 

[TURBOPOWERED68]

I may be able to help with 1, 2, and 3... let me look at the pile of hoses/pipes I have left over and see if stuff matches. I should know tomorrow, will post what I have.
Sincerely,
John A, Turbohh

cool let me know how the digging goes.

 

[jlat]

hello; In my case with bought off the shelf pcs. I couldn't get it to line up with my CAI.
good luck
IBBY

 

[TURBOPOWERED68]

hello; In my case with bought off the shelf pcs. I couldn't get it to line up with my CAI.
good luck
IBBY

thanks for the heads up.
But
NO traditional cold air intake for me.
my cold air intake is going to be a missing driver side head light

 

[turbohh]

David,
I have a straight 3.5" ID x 3.75" L dark gray silicone hose for a coupler...

but no pipe, and my 45 degree coupler is 3.5 X 3.5... not sure that'll help you much. It's a left over from Mark Hueffman's 3.5 inch MAF tube kit.

PM me if want either. $10 plus shipping for either, $15 plus shipping for both. I live in zip code 94582 (NorCal). I'll take Paypal at no extra charge.
John A

 

[TURBOPOWERED68]

you have a PM

 

[ALVAROG1983]

I GOT A 3.5 MAF AND FILTER AND BOOTS.

 

[TURBOPOWERED68]

I GOT A 3.5 MAF AND FILTER AND BOOTS.

post up a picture of the filter

 

[turbohh]

David,
PM sent with postage and PP addy...
John A

 

[TURBOPOWERED68]

pp done

 

[TURBOPOWERED68]

only need now is the pipe and filter.

 

[turbohh]

David,
Going to post office now... PM'd tracking info.
John A, Turbohh