wtb stock heater rail lines and set of stock 84-87 junk injectors

[tb3]

need the stock 86/87 steel coolant lines that bolt to the pass side intake. don't need the clamp that holds them.
also looking for a set of hot air or ic'd stock injectors. they don't need to be clean or even work. just need 6 of them. hoping to score a set of them on the cheap if anybody's got a set laying around they haven't gotten around to throwing away yet

 

[precizion818]

I have a set of injectors. Need to make sure I have all 6 though. Will let you know when I get home

Posted from the TurboBuick.Com mobile app

 

[Chuck Leeper]

I've got some injs. Not pretty but???
Yours for the ride.

 

[tb3]

as long as they will clean up nice for a display engine, then I'm good with them. they are going to be taped off, lightly blasted and then painted.
Chuck if you got a set, let me know how much to 63390 zip code. I can pay however you like.

Posted from the TurboBuick.Com mobile app

 

[tb3]

I have a set of injectors. Need to make sure I have all 6 though. Will let you know when I get home

Posted from the TurboBuick.Com mobile app

thanks for checking. I'll let you know if Chuck has what I need.

Posted from the TurboBuick.Com mobile app

 

[Jay J]

How pretty do the coolant lines have to be??

 

[tb3]

long as their not twisted or pitted all to hell

Posted from the TurboBuick.Com mobile app

 

[Chuck Leeper]

as long as they will clean up nice for a display engine, then I'm good with them. they are going to be taped off, lightly blasted and then painted.
Chuck if you got a set, let me know how much to 63390 zip code. I can pay however you like.

Posted from the TurboBuick.Com mobile app

I'll dig out the 6 nicest ones, put some new o'rings with them.
let me know where to

 

[Jay J]

The one that I have is not twisted at all. It is actually in pretty good shape; the only corrosion that I can see is on the last 1/2" on the larger tube with the 90 deg. bend) that connects to the heater core hose.

 

[Bescurred]

M233roller had a set of heater lines

 

[tb3]

chuck, dont put orings on them. I have several new sets of orings sitting around. I'll pm you afterwhile.


Posted from the TurboBuick.Com mobile app

 

[tb3]

The one that I have is not twisted at all. It is actually in pretty good shape; the only corrosion that I can see is on the last 1/2" on the larger tube with the 90 deg. bend) that connects to the heater core hose.

can u post a pic and price when u can?

I'll look at what m233rollers got but its probably like everything else he sells and is super nice and priced as it should be.

these arent for me and just needs to be driver quality and not leak and hopefully priced low

Posted from the TurboBuick.Com mobile app

 

[Jay J]

PM sent.