160lb injectors with fast b2b

[89TURBOTA]

hello, does anyone run 160lb injectors with the fast bank to bank instead of the sequential, how do they idle and is it harder to tune,
thanks
robert

 

[turbobuick]

I run them without any issues.

 

[Greg Kelley]

I run them and installed them on quite a few customers cars as well. No problems but all are race only. Would idle clean @ 700 RPM if I wanted.

 

[S2V6RACER]

Originally posted by Greg Kelley
I run them and installed them on quite a few customers cars as well. No problems but all are race only. Would idle clean @ 700 RPM if I wanted.

Depending on the cam selection.

 

[TurboTR]

I've found that yes, they are a bit too big at idle. It will still run and all, but getting it to idle at say 14.6:1 may be a small challenge lol. If you graph the inj pw at idle with 160's you'll likely see a nice flat line, pegged at min pw for most of the time...

TurboTR