1989 TT/A parts wanted

[dsmith4994]

i need the following 89 TTA specific parts
Fuel line bracket that attaches to the valve cover
Valve cover mounting perches, washers and crown nuts
Catalytic converter hanger bracket
3" Ball flange that goes after the catalytic converter
Tubular spohn k-frame for turbo v6 3rd gen and lower a-arms
spohn 200r4 transmission crossmember with control arm (prefer heavy duty one)
New rear Emergency brake cables for the 1le pbr rear brake option
ATR Stainless 3" intake tube TTA specific
ATR Pitbull Exhaust: Either 3" straight shot or dual outlet
ATR header mandrel bent crossover pipe (Have stock one to partial trade back if you dont have the original)
TTA specific Dash harness complete with vats
email me pics and prices to dsmith4994@aol.com or call dave at 203-623-6516 or PM me

 

[K Beauchamp]

Contact Bryan at Gbodyparts.com. He has some cars sitting around. Not sure what is for sale or not. Some of those parts are getting hard to find. Good luck.

 

[dsmith4994]

pictures of the parts i am looking for

here are a few pictures of the parts i am looking for
1) cat hanger
2) Fuel line bracket
3) 3" ATR intake pipe
4) 3" Ball Flange that goes after cat converter

 

[89ICBM]

i need the following 89 TTA specific parts
.ATR header mandrel bent crossover pipe ..

Hi dsmith4994,

I have the cross over (ATR) that you are looking for. I want 350.0 for it plus shipping. The price is firm. PM me, I will get back to you.

 

[dsmith4994]

rearts wanted update

i still need the following 89 TTA specific parts
1) Fuel line bracket that attaches to the valve cover
2) Catalytic converter hanger bracket"
3) New rear Emergency brake cables for the 1le pbr rear brake option
4) ATR Stainless 3" intake tube TTA specific or comparible the same length.
5) ATR Pitbull Exhaust: Either 3" straight shot or dual outlet
6) need two wires off a GTA Dash harness with vats, The heavy gauge yellow and red wires that go to the starter relay at the base of the steering column with ends/connector still attached. Both wires are about 14" of wire going to the fuel injector/computer/firewall three way junction is. The yellow is the vats also 14" or so. They melted due to rubbing and shorted out.
email me pics and prices to dsmith4994@aol.com or call dave at 203-623-6516 or PM me
A big thanks to the people that came up with the other parts i wanted...TTT

 

[Jan Larsson]

i still need the following 89 TTA specific parts
1) Fuel line bracket that attaches to the valve cover
2) Catalytic converter hanger bracket"
3) New rear Emergency brake cables for the 1le pbr rear brake option
4) ATR Stainless 3" intake tube TTA specific or comparible the same length.
5) ATR Pitbull Exhaust: Either 3" straight shot or dual outlet
6) need two wires off a GTA Dash harness with vats, The heavy gauge yellow and red wires that go to the starter relay at the base of the steering column with ends/connector still attached. Both wires are about 14" of wire going to the fuel injector/computer/firewall three way junction is. The yellow is the vats also 14" or so. They melted due to rubbing and shorted out.
email me pics and prices to dsmith4994@aol.com or call dave at 203-623-6516 or PM me
A big thanks to the people that came up with the other parts i wanted...TTT

Dave, no 3 ... talk to these guys LT1/1LE PBR Rear disc brake cables, 3rd gen F body as i doubt you will find new NOS GM cables ...

 

[dsmith4994]

re:brake cable

Awesome,
I bought stuff from these guys before but i never saw the cables for sale.
There stuff takes forever to get here but is really good quality. I highly recommend doing business with them if you are not in a big hurry. Very good communication the whole time too. My stuff was on back order. (1le prop. valve & braided brake lines)
I can finally put my Borg Warner 3.27 9 bolt 1LE rear end in the car.
(92 TT/A convertible hybrid w/original 89 TT/A 32k mile engine and trans.)
Getting closer to reality. I will be posting the build and pictures as it comes together. I started it in the Turbo trans am section awhile back but im not sure if i should be in the hybrid section. Technically it is a turbo trans am even if i made it into one myself....Thanks....TTT

 

[dsmith4994]

re: ignition wire picture

here is a picture of the ignition wiring i need. The heavy gauge pink and yellow with the blue connector around 14" long or to the 3 way split

 

[Scott89TTA]

here is a picture of the ignition wiring i need. The heavy gauge pink and yellow with the blue connector around 14" long or to the 3 way split

That's the ones that melted down when I had a short last Spring...what a mess that was ! http://www.turbobuick.com/forums/tu...-today-fusible-link-ign-sw-2.html#post2471316 I ended up splicing in new wire.

-Scott

 

[dsmith4994]

re:melted wires

I had the same short in my TTA. They will all do it eventually. How long did it take you to find the short after the fusible link started melting? i reinstalled it using a sheath over the red wire.

 

[JP112_89]

PM sent. I have a ATR Maf pipe.

Joe