now my car is far from being together at this point,in the middle of a frame off.... but i was wondering if anyone has tried placing the nozzels anywhere else besides the up pipe....like maybe in a spacer under the upper plenum?? would this work? might there be any advantages/disadvantage to doing this? just some food for thought haven't seen anything about this so thought i'd ask.....joel
alcohol injection nozzel locations...would it work?
- Thread starter nonosv6
- Start date
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
- Joined
- May 27, 2001
- Messages
- 9,473
Ive done it.
I wouldnt recommend doing it. I think there are advantages to getting the mix in farther upstream.
I wouldnt recommend doing it. I think there are advantages to getting the mix in farther upstream.
Why would you want to do a plenum spacer?
To clear the 5 inch MAF pipe going to your PT88 turbo
Wheel is round.. no reason to re-invent. Results may vary when you change the recipe.. and you'll need a solenoid since there is vacuum after the TB.
GNVYUS 1
Well-Known Member
- Joined
- Dec 15, 2002
- Messages
- 4,364
I tried stealthing the system with the nozzle on the bottom of the FMIC pipe. But even with the line being higher than the bottle, it still siphoned alky into the pipe.
Maybe putting the nozzle under the 5" inlet will still be high enough to stop the siphoning?? It all depends on where your bottle is, my DSM water bottle is hidden and hanging where the ram air opening is in the rad support. The outlet of my bottle is low enough to work with the idea above, if interested PM me for pics.
Maybe putting the nozzle under the 5" inlet will still be high enough to stop the siphoning?? It all depends on where your bottle is, my DSM water bottle is hidden and hanging where the ram air opening is in the rad support. The outlet of my bottle is low enough to work with the idea above, if interested PM me for pics.
