Anybody have the Sealed Power Master Catalog ? Help !!!

[KWIKR 1]

I'm looking for a SP part # for 5/16" (ball ends) pushrods in the 8.600" range . If you can help with ANY info , it will be very welcomed . Thanks.

 

[gofstbuick]

According to my SP catalog, the factory pushrod number is 48811 (TRW number, optional chrome moly) and RP-3213R (sealed power, optional chrome moly). But these are factory style pushrods. Length is 8.690. I hope this is what you are looking for, if not sorry.

 

[Intercooler]

I have a set of stock lengths with 10 miles on them if you are interested.

 

[KWIKR 1]

The stock length is to long . I need a 8.600" to get a .030"-.035" preload .

 

[Intercooler]

Go to www.cvproducts.com and order custom length. I needed 8.575" pushrods for my last motor and they have the best pushrods I have ever seen for $75.00.

 

[KWIKR 1]

I thought I might be able to find a set of SP that would fit the bill . It most likely be cheaper and I would not have the BS to have them shipped up this way .

 

[Intercooler]

Sealed Power to the best of my knowledge do not make custom lengths. Don't cheap out on the pushrods! You would be amazed at the deflection if you watch a video of them in action! These are one piece .080" wall Chromemoly. Bad ass! Comp Cams has different lengths too but they run $125.00 and up. You will not be disappointed!

 

[Russ Merritt]

Call Tom Allen @ Champion heads, He's got ALL kinds of size push rods. 386 446 4488

 

[KWIKR 1]

Thanks guys !!!