You can type here any text you want

Cleaning out the garage, make offers

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

jdpolzin

Well-Known Member
Joined
Dec 5, 2004
Messages
8,516
All parts are 86/87 parts unless stated



1. stock Innercooler

2. throttle body (complete with sensors and throttle cable bracket)

3. complete set of stock pistons and rods 50K miles on them

4. main accessory bracket

5. alternator

6. a few power steering lines

7. tensioner pulley

8. AC compressor

9. 2 sets of complete 8445 heads

10. metal vacuum hardlines drivers side

11. electric fan

12. metal vac lines pass side with PVC and hoses

13. Compete set of turbo rods, no turbo pistons

14. fuel pressure regulator (stock)

15. oil cooler adapter + lines

16. 1/4 glass windows (chrome for vynal top)

17. Inner cooler fan (2 of these)

18. Inner cooler brackets

19. boost solenoid with Y vacuum lines

20. Vinyal top chrome trim

21. hotwire to alternator bracket

22. Battery postive wire

23. Battery negative wire

24. All the EGR components

25. turbo inlet bell

26. Down pipe elbow

27. MAP sensor

28. 86/87 heater core

29. heater control valve

30. maroon carpet dash cover

31. Charcoal canasters

32. Vacuum boosters

33. stock upper control arms

34. heater box fan

35. 85 Chrome Regal grille (NICE)

36. IC bracket (drivers side) (2 OF THESE)

37. IC Bracet (passenger side)

38. INJECTORS (42.5# set of 8, low miles)

39. Lisence Plate bracket (rear)

40. License Plate Bracket (front)

41. CAM Sensor w/cap

42. CAM Sensor w/o cap

43. Converter/Flywheel Inspection cover

44. Stock Starter 34K miles

45. POWERMASTER (Cardone Reman 2-3 years old, Accumulator went bad, otherwise good)

46. 14 bolt oil pan (Cleaned and painted black, non-baffled, NICE)

47. 14 bolt oil pan (non-baffled)

48. 20 bolt oil pan (baffled)

49. AC Delete pulley (2 of these)

50. 4.1 Stock pushrods

51. 14 bolt front cover (cleaned needs two bolts drilled out)

52. 20 bolt front cover (ready to go)

53. Oil pick up tube

54. D5 Torque Converter (34k miles)



I will update as I dig more out. Just make me a fare offer and they are yours. Take care -----Jeremy
 
I'm gonna need a good tensioner soon. Mine looks like its bouncing a little more than it should:rolleyes: Also need a good LT1 starter for the firechicken sometime if you come by one. I think after 2 years of it barely starting the car I should replace it this spring:biggrin:
 
30. maroon carpet dash cover
and perhaps the D5

JD PM with price and shipping for both and see if we can work somthin out....dash cover for sure but if it dont fold then its a killer to ship price wise.

Mike
 
Vinyl Top Trim

Wutup Jeremy? on a scale of 1-10 how is the vinyl top trim??? i might need a spare...... lmk


Aaron
 
Update #1

1. stock Innercooler

2. throttle body (complete with sensors and throttle cable bracket)

3. complete set of stock pistons and rods 50K miles on them

4. main accessory bracket

5. alternator

6. a few power steering lines

7. tensioner pulley

8. AC compressor

9. 2 sets of complete 8445 heads

10. metal vacuum hardlines drivers side

11. electric fan

12. metal vac lines pass side with PVC and hoses

13. Compete set of turbo rods, no turbo pistons

14. fuel pressure regulator (stock)

15. oil cooler adapter + lines PENDING

16. 1/4 glass windows (chrome for vynal top)

17. Inner cooler fan (2 of these)

18. Inner cooler brackets

19. boost solenoid with Y vacuum lines SOLD

20. Vinyal top chrome trim

21. hotwire to alternator bracket

22. Battery postive wire

23. Battery negative wire

24. All the EGR components

25. turbo inlet bell

26. Down pipe elbow

27. MAP sensor

28. 86/87 heater core

29. heater control valve

30. maroon carpet dash cover SOLD

31. Charcoal canasters

32. Vacuum boosters

33. stock upper control arms

34. heater box fan

35. 85 Chrome Regal grille (NICE)

36. IC bracket (drivers side) (2 OF THESE)

37. IC Bracet (passenger side)

38. INJECTORS (42.5# set of 8, low miles)

39. Lisence Plate bracket (rear)

40. License Plate Bracket (front)

41. CAM Sensor w/cap

42. CAM Sensor w/o cap

43. Converter/Flywheel Inspection cover

44. Stock Starter 34K miles

45. POWERMASTER (Cardone Reman 2-3 years old, Accumulator went bad, otherwise good)

46. 14 bolt oil pan (Cleaned and painted black, non-baffled, NICE)

47. 14 bolt oil pan (non-baffled)

48. 20 bolt oil pan (baffled)

49. AC Delete pulley (2 of these)

50. 4.1 Stock pushrods

51. 14 bolt front cover (cleaned needs two bolts drilled out)

52. 20 bolt front cover (ready to go)

53. Oil pick up tube

54. D5 Torque Converter (34k miles) SOLD

55. Chrome Parking light bezel for bumper (nice chrome)

56. Woodgrain dash bezel

57. woodgrain radio bezel

58. Floor Shifter assembly (no handle)
 
Either my power steering pump is making noise or it is my alternator. I'll check it out and get back to you but if you get a buyer before then go ahead and sell.
 
Interested in:

2 - TB w/sensors
4 - Main acc bkt
10 - Metal DS Vacuum Lines
12 - Metal P/S Vacuum Lines
41 - Cam Sensor w/cap
48 - 20 Bolt Turbo baffled pan
52 - 20 Bolt Timing Cover

Shoot me a price I can't look away from :biggrin:..... shipped to 39183 to my work (business address ... sometimes it is cheaper when shipping "to" a business)

I hope you also have all the bolts for above pieces?
 
Keep the offers coming guys, I want this crap out of the garage!

Update #2

1. stock Innercooler

2. throttle body (complete with sensors and throttle cable bracket)

3. complete set of stock pistons and rods 50K miles on them SOLD

4. main accessory bracket

5. alternator

6. a few power steering lines

7. tensioner pulley

8. AC compressor

9. 2 sets of complete 8445 heads

10. metal vacuum hardlines drivers side

11. electric fan

12. metal vac lines pass side with PVC and hoses

13. Compete set of turbo rods, no turbo pistons

14. fuel pressure regulator (stock)

15. oil cooler adapter + lines PENDING

16. 1/4 glass windows (chrome for vynal top)

17. Inner cooler fan (2 of these)

18. Inner cooler brackets

19. boost solenoid with Y vacuum lines SOLD

20. Vinyal top chrome trim

21. hotwire to alternator bracket

22. Battery postive wire

23. Battery negative wire

24. All the EGR components

25. turbo inlet bell

26. Down pipe elbow

27. MAP sensor

28. 86/87 heater core

29. heater control valve

30. maroon carpet dash cover SOLD

31. Charcoal canasters

32. Vacuum boosters

33. stock upper control arms

34. heater box fan

35. 85 Chrome Regal grille (NICE)

36. IC bracket (drivers side) (2 OF THESE)

37. IC Bracet (passenger side)

38. INJECTORS (42.5# set of 8, low miles)

39. Lisence Plate bracket (rear)

40. License Plate Bracket (front)

41. CAM Sensor w/cap

42. CAM Sensor w/o cap

43. Converter/Flywheel Inspection cover

44. Stock Starter 34K miles

45. POWERMASTER (Cardone Reman 2-3 years old, Accumulator went bad, otherwise good)

46. 14 bolt oil pan (Cleaned and painted black, non-baffled, NICE)

47. 14 bolt oil pan (non-baffled)

48. 20 bolt oil pan (baffled)

49. AC Delete pulley (2 of these)

50. 4.1 Stock pushrods

51. 14 bolt front cover (cleaned needs two bolts drilled out)

52. 20 bolt front cover (ready to go)

53. Oil pick up tube

54. D5 Torque Converter (34k miles) SOLD

55. Chrome Parking light bezel for bumper (nice chrome)

56. Woodgrain dash bezel

57. woodgrain radio bezel

58. Floor Shifter assembly (no handle)
 
Another Update---#3

1. stock Innercooler

2. throttle body (complete with sensors and throttle cable bracket)

4. main accessory bracket

6. a few power steering lines

7. tensioner pulley

9. 2 sets of complete 8445 heads

11. electric fan

14. fuel pressure regulator (stock)

15. oil cooler adapter + lines PENDING

16. 1/4 glass windows (chrome for vynal top)

17. Inner cooler fan (2 of these)

18. Inner cooler brackets

20. Vinyal top chrome trim

21. hotwire to alternator bracket

24. All the EGR components

25. turbo inlet bell

26. Down pipe elbow

27. MAP sensor

28. 86/87 heater core

29. heater control valve

31. Charcoal canasters

32. Vacuum boosters

33. stock upper control arms (rear)

34. heater box fan

35. 85 Chrome Regal grille (NICE)

36. IC bracket (drivers side)

38. INJECTORS (42.5# set of 8, low miles)

39. Lisence Plate bracket (rear)

40. License Plate Bracket (front)

41. CAM Sensor w/cap

42. CAM Sensor w/o cap

44. Stock Starter 34K miles

45. POWERMASTER (Cardone Reman 2-3 years old, Accumulator went bad, otherwise good)

46. 14 bolt oil pan (Cleaned and painted black, non-baffled, NICE)

49. AC Delete pulley (2 of these)

50. 4.1 Stock pushrods

51. 14 bolt front cover (cleaned needs two bolts drilled out)

52. 20 bolt front cover (ready to go)

53. Oil pick up tube

55. Chrome Parking light bezel for bumper (nice chrome)

56. Woodgrain dash bezel

57. woodgrain radio bezel

58. Floor Shifter assembly (no handle)

59. Boost Solenoid
 
Does/can that floor shifter assembly include the cable and associated linkage to the transmission?
 
Adam, I actually dont have a shift cable or the bracket for the trans. I need to find a set for myself as well. This is just the shifter itself. -----Jeremy
 
Back
Top