CLEARANCE SALE-all prices reduced to move

[87buickracer]

9.5" Lock/up converter 3200-3400 stall 425.00 shipped in u.s

stock heads (8445) 75.00 plus shipping/u.s

stock i/c 75.00 plus shipping/u.s

comp cam 218 flat tappet (7k miles) 75.00 shipped/u.s

Brand new 214/224 flat tappet w/poston hi-rev lifters 199.00 shipped/u.s

precision te44 w/actuator (2k miles on turbo) 675.00 plus shipping/u.s

mease 3" dp w/dump 375.00 plus shipping/u.s

full race(professionally built) 400 transmission w/brake (2000hp) 1850.00 plus shipping w/core exchange(has chevy bell housing and short tail shaft-can change to jw)

chevy hi-torque mini starter(brand new) 115.00 shipped

BRAND NEW "NOS" grand national/gnx grill in box 475.00 plus shipping

 

[jcj53115]

convertor

Whos the convertor made by? Milage?

 

[clusolynn]

TRADE? I'm in FLORIDA....

WILL YOU CONSIDER ANY TRADES FOR THE CONVERTOR? I HAVE A PARTS CAR WITH COMPLETE INTERIOR ETC., LET ME KNOW,THANKS, JOHN LYNN clusolynn@excite.com OR 386-719-6814.

 

[rogerv6]

Heads

I take Heads

 

[87buickracer]

Converter was custom made by CRT transmission in tampa,fl.It has under 3k miles and cost was $700.00 new when purchased.CRT has a website if you want to check them out.

Whos the convertor made by? Milage?

 

[87buickracer]

Will check shipping to PR and send you PM.what is your zip code?

I take Heads

 

[87buickracer]

What parts do you have?

WILL YOU CONSIDER ANY TRADES FOR THE CONVERTOR? I HAVE A PARTS CAR WITH COMPLETE INTERIOR ETC., LET ME KNOW,THANKS, JOHN LYNN clusolynn@excite.com OR 386-719-6814.

 

[rogerv6]

heads

Will check shipping to PR and send you PM.what is your zip code?

My zip code is 00725 please send pm with your addr to send m.o

 

[j_alstrand2000]

Question,How would the new 214/224 flat tappet w/poston hi-rev
lifters do for my 87 stock short block,ported & polished 8445's,3" DP,
dual 3" exhaust,4" cold air intake with a GT6152e turbo running 17psi
of boost & 3200-3400 N/L 10" torque converter?Is this cam a little to
much for my daily driver?Please let me know im interested ok.

Thanks,
John

 

[87buickracer]

I ran a 218/218 comp cam on the street with no problem and lots of top end.
This cam woul have similar performance to the 218 and give good throttle response from on a roll on the street.For your combo I would go with comp 212 flat tappet or 210 roller.This cam maybe a little too much for what your looking for.

Question,How would the new 214/224 flat tappet w/poston hi-rev
lifters do for my 87 stock short block,ported & polished 8445's,3" DP,
dual 3" exhaust,4" cold air intake with a GT6152e turbo running 17psi
of boost & 3200-3400 N/L 10" torque converter?Is this cam a little to
much for my daily driver?Please let me know im interested ok.

Thanks,
John

 

[j_alstrand2000]

I ran a 218/218 comp cam on the street with no problem and lots of top end.
This cam woul have similar performance to the 218 and give good throttle response from on a roll on the street.For your combo I would go with comp 212 flat tappet or 210 roller.This cam maybe a little too much for what your looking for.

Great to hear from you.So it would be a little much for my combo,What
would the difference be between a comp 212/212 flat tappet and a comp
212/212 roller?Would the roller be worth the extra $$ it cost in the long run?
Look to hearing back from you,Thank you for your time and advice.

John

 

[87buickracer]

heads

sale pending---

 

[87buickracer]

The difference would be more performance/cost with the 212 roller and it would be great if your planning on future up grades and give the extra security of not having to worry about wiping lobes.The 210/210 or 212/212 roller will work fine with your application.

Great to hear from you.So it would be a little much for my combo,What
would the difference be between a comp 212/212 flat tappet and a comp
212/212 roller?Would the roller be worth the extra $$ it cost in the long run?
Look to hearing back from you,Thank you for your time and advice.

John

 

[Cme2fly]

Would you be interested in a aluminum core support in trade for your converter?

 

[87buickracer]

Turbo crank (rolled fillets)

I have a turbo crank for sale.It was 10/20 until I spin #2 rod bearing.I had it checked at machine shop and it will clean up at 20/40.This crank will work in a stock application.$85.00 shipped in u.s

 

[thunderace31]

full race(professionally built) 400 transmission w/brake (2000hp) 1850.00 plus shippi

Who built this trans???
What 1st gear is in it??

Would it work behind a 1300 hp N20 Big Block Chevy??

 

[87buickracer]

A local performance trans shop here in central fl.I will get info for you with pm.

Who built this trans???
What 1st gear is in it??

Would it work behind a 1300 hp N20 Big Block Chevy??

 

[87buickracer]

parts sold-11/10/07

2 sets of 8445 heads-sold
intake-sold
front cover-sold
flywheel-sold
pushrods-sold
rocker arms-sold
stock intercooler-sold
turbo compressor cover-sold


more parts available!!!