Don't have a driver side power seat?

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

Red Regal T

Senior Member
Joined
May 24, 2001
Messages
19,243
Well, here's all you need, except 12 volts, to have a power driver side power seat. Correct assy for TRs, smooth, quiet motors, comes with controls, seat panel (probably need to color match), track covers, complete wiring harness. Plug and play ... Just run 12 volts from your fuse panel, and ground.

$210 by paypal, shipped to continental US
 

Attachments

  • Picture 190.jpg
    Picture 190.jpg
    76.3 KB · Views: 323
  • Picture 192.jpg
    Picture 192.jpg
    76.1 KB · Views: 317
Is there existing wiring

I am buying a T-Type w/out power seat. What are the chances that the wiring harness includes the wiring for the seat?
 
Well, the wiring for the seat comes with the power seat. A car with no power seat will not have the wiring for a power seat in place. All that is necessary is to run a wire plugged into a battery (12V) connection from your fuse panel under the carpet to the positive lead on from the seat control button console, and then ground the ground wire. The orange wire in the lower picture is the hot, and black to ground. ;)
 
If your power seat uses the below pictured parts as part of the assembly, you need to get rid of this junk, and replace it with the troublefree 87 and up power seat assembly.
 

Attachments

  • 001%20%284%29.jpg
    001%20%284%29.jpg
    51 KB · Views: 87
Back
Top