You can type here any text you want

engine pic.

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

tatoGN

junior member
Joined
Jan 1, 2011
Messages
18
Finished 3 weeks ago.
 

Attachments

  • Baile de Graduacion Marian 032.jpg
    Baile de Graduacion Marian 032.jpg
    79 KB · Views: 782
  • Baile de Graduacion Marian 033.jpg
    Baile de Graduacion Marian 033.jpg
    65.4 KB · Views: 789
  • Baile de Graduacion Marian 034.jpg
    Baile de Graduacion Marian 034.jpg
    66.9 KB · Views: 781
  • Baile de Graduacion Marian 035.jpg
    Baile de Graduacion Marian 035.jpg
    78.6 KB · Views: 821
  • Baile de Graduacion Marian 040.jpg
    Baile de Graduacion Marian 040.jpg
    65.4 KB · Views: 784
I did notice the rod,so i fix it before the oil pan.

probe forged full floating piston
215-220 roller cam
ported irons
balance crankshaft
 
very nice!

what kind of headers/ gaskets are those?

what ratio are those rockers?
 
kenne bell headers
fel pro ex gasked
rjc head gasked
td 1.65 rockers
7.900 push rod
 
You did put the pins on the block to locate the heads?
 
Are those stock covers gonna work with the roller rocker?:confused: Thought you needed the RJC valve cover extentions in order to use the stock covers?:confused:
 
I noticed you are using a stock oil pump pickup with the RJC girdle. You did not have an extension on the pickup. Did you check the pickup height against the pan you are using? I have found that the pickup is almost NEVER correct!!!!! It usually sits too high in the pan which makes it easier to suck air when turning a corner or accelerating/braking hard. Very easy to check. Put a plastic bag over the pickup and a piece of clay (playdough works great)
 
Ok,I did put the pins on the block.Also the oil pickup extension that comes with the girdle is instaled.
I am using stock valve covers with RJC extension.The oil pickup is the stock one and I did check the
clerance with the oil pan.
 
Back
Top