By registering with us, you'll be able to discuss, share and private message with other members of our community.
SignUp Now!Awesome!!!!
Just on the phone and someone just moved up the list, and he's still running today. Something like 9.8 this, 136 that, blah, blah, blah. : )
He's made three 9 sec runs today.
Way to go dude.. awesome to keep messing with the setup and figure out what it particularly likes. What kind of boost controller are you using? The old MSBC? Or did you change to something else?was a good day at atco today, buick vs ford and mustang
didnt change anything since it ran BOPalooza event the saturday just after sandy hit
first pass time shots
only a 1.523 , 6.38 @ 110.2 and 9.960 @ 136.81
second pass time shots
1.529 6.38 @ 110.04 and 9.974 @ 136.79
3rd time shots..added 2 psi to launch boost (now at 9.5 psi and 4000 rpm 2- step)
1.464 6.229 @ 110.26 and 9.876 @ 136.91
4th time shot --wasnt going to go but what the hey, added 1 psi to 1st stage (now 25.5psi ) and set 2-step to 4100 rpm
1.448, 6.251 @ 110.73 and 9.827 @ 136.79
called murph and he went through the list and told me i was in 3rd on the list as jc had a 9.82 with a 5.... so close
so back out again for elims so not pushing it anymore dialed 10.0 and hit a -007 so i stayed on it and went
1.454, 6.29 @ 110.33 and 9.877 @ 136.80
im out on a red so have to wait so either go home or wait to run time trials for a last chance at the #2 spot ...
so i decide to hang and up the launch 1psi (now 10.5psi) and move 2-step to 4200
not good .... blew tires off and 1.863 6.752 @110.5 and 10.320 @ 137.23
mph looks promising so i hot lap back into the lanes
and not wanting another tire spin run i drop the launch back down 1psi (9.5 psi) and take 2-step back to 4100
1.463 4.055 6.259 @ 110.97 8.178 9.815 @ 137.68
boost was at 26.5 at top and timing at 18.5deg
93 (mix of quik chek and valero pump gas )
meth dual nozzle alkycontrol
weight at 3520
325/50 mt radials (28") at 18psi
th400 ptc 9.5 19 blade , 3.42 stock gears
air temp was in the low 40s
109 ...stock main caps and bolts holding the crank in
fast seq classic
10.6 af targeted
HeheIt's too cold for Alky doc you know that![]()
What does the Hobbs switch do exactly? Where is it wired?msbc-1 with co2 now setup in wastegate mode using a 2psi hobbs off ebay (no more spiking) and using a 4.5psi spring in pw 46 gate on an old atr 3"pipe
still running full dual closed exhaust through the mufflers and on a .63 exhaust housing