turbobitt
Well-Known Member
- Joined
- Feb 14, 2002
- Messages
- 2,465
I bet your excited to get it back. Just in time with the weather turning around.
AG.
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
AG.
C
coach
Guest
You are right. I still have a couple weeks worth of tinkering with it before its all ready. I have a 3 day show/race on June 20-22, and a shitload to do by then.
C
coach
Guest
Well I got the call this morning...THE CAR IS FINISHED!!!
Vince from JANIS TRANSMISSION's went all out to make sure that everything was perfect. Don't hesitate to call him for your Billet 200's.
Now fix a few bugs and away we go...
Vince from JANIS TRANSMISSION's went all out to make sure that everything was perfect. Don't hesitate to call him for your Billet 200's.
Now fix a few bugs and away we go...
Good deal, and good luck
C
coach
Guest
Well guys...my phone app will not work, so no picks. The sight would not even let me log on yesterday, and I do not have the pics in this computer. I guess you'll have to wait for the app to get fixed before you get to see the finished car...
- Joined
- Apr 10, 2009
- Messages
- 1,675
Well, damn! Now I am DE-pressed! 
ttypewhite
Well-Known Member
- Joined
- Oct 1, 2001
- Messages
- 4,159
Coach, if you want, send them to me by text or email, I will get them up for you. Pm me if your interested.
That's f'in teamwork right there!
ttypewhite
Well-Known Member
- Joined
- Oct 1, 2001
- Messages
- 4,159
As promised. What a beauty!!!
ttypewhite
Well-Known Member
- Joined
- Oct 1, 2001
- Messages
- 4,159
Royal-T-Ltd
Well-Known Member
- Joined
- Jul 12, 2003
- Messages
- 4,328
Coach how are the Executioner emblems coming ? i ASSume those are the finishing touches that go on the upper plenum and valve covers…. am i right? inquiring minds want to know
aaron
aaron
C
coach
Guest
Actually they are not Executioner emblems....but thats not a bad idea...Coach how are the Executioner emblems coming ? i ASSume those are the finishing touches that go on the upper plenum and valve covers…. am i right? inquiring minds want to know
aaron
The "Executioner" is going on the Carbon Fiber hood liner when its built.
The Plenum and Valve covers get some billet Buick Tri-shield logos, but not until the covers get chromed. They are not finished yet.
C
coach
Guest
Ok...my phone app SUCKS!!! I have had other members load up pics. I just got my laptop straightened out, so lets see if it works...
The car is all cleaned, and the engine is all detailed. It has the new radiator pipe from TR Customs and the inlet pipe and new K&N Pre-wrapped filter. Thats it for now.
The car is all cleaned, and the engine is all detailed. It has the new radiator pipe from TR Customs and the inlet pipe and new K&N Pre-wrapped filter. Thats it for now.
C
coach
Guest
More pics...
C
coach
Guest
And the new one piece air dam...
C
coach
Guest
I should also post up that I will be adding a HUGE electric fan. I'm having a slight heating issue and dont even want the hassle at all. I will be doing a complete custom install of a single 18" Lincoln Mark VIII 2 speed fan. I'm going to work with John from Casper's and Cal Hartline to adapt the fan into my wiring and use the FAST XFI to activate the high speed function at a specific temp. The low speed will come on as normal...the high speed will only come on in a "overheating" type issue...( very hot day, bumper to bumper cruising type situation)
The Mark VIII fan flows 3250 cfm's on low speed and 4600 cfm's on high speed. Our factory fan only flows 1600-1800 cfm's. I may do a separate thread on this install, as this fan is a MONSTER from the info I have gathered on other forums about it.
The Mark VIII fan flows 3250 cfm's on low speed and 4600 cfm's on high speed. Our factory fan only flows 1600-1800 cfm's. I may do a separate thread on this install, as this fan is a MONSTER from the info I have gathered on other forums about it.
