Scaled KPA v RPM
--------------------------------------------------------------------------------
If 1 psi is just under 7 kpa. then is it correct to use this to set the user load points on a Gen II translator. I.E. user load with an 80 would engage at around 11- 12 psi?
__________________
The bull**** stops when the green flag drops!
--------------------------------------------------------------------------------
If 1 psi is just under 7 kpa. then is it correct to use this to set the user load points on a Gen II translator. I.E. user load with an 80 would engage at around 11- 12 psi?
__________________
The bull**** stops when the green flag drops!