Help Bob Boost Problems

[CHANCE]

hey bob i cant get my trans pro to go higher than 10 psi can you help and please put it in laymens terms heres the settings thanks

TPS SPOOL 1.500
RPM SPOOL 1824
TPS START 3.00
PSI START 5.0
DC% START 12.0
PSI SET 15.0
PSI AUX 10.0
GAIN 2.0
DC%ST AUX 10.0

 

[TurboBob]

Replied to your post at Full Throttle Tech.

Bob

 

[CHANCE]

thanks bob i set it a 50% and i have about 13# now do i keep raising the DC or do i change something else

 

[TurboBob]

you can keep going up on the start DC, let me know how it goes.

It sounds like the wastegate might be too loose. I had an occaision where the boost woudn't go up and it turnout to be a loose/stripped bolt holding the turbo that held the wastegate bracket. Once I fixed that, things worked well again.

Can you tell me more about your combination? Turbo, engine, intercooler, etc...

B

 

[CHANCE]

heres the run down on my combo stock heads opened up stock block stock crank stock rods forged pistons, girdled bottom end 210-210 cam gm lifters harland sharp 1:60 roller rockers hemco upper stock lower ported no EGR stock throttle body stock turbo we think stock intercooler trans pro of course 009 injectors alky extender pro chip and thats all i can think of if i messes somthing let me know thanks bob