hey svoray, or someone..

[Turbo6Smackdown]

I was on your page, checkin out your mustangs.. (which i love) and noticed that turbo.. looks curiously like an old garret.. and that inlet bell, would that bell fit ours? http://www.cardomain.com/ride/573381/2

I would love a curved inlet bell.. what do you think? anyone else good with mustangs?

 

[notacarlo]

I believe the 86 SVO uses the same turbo as the 86-87' GN.

 

[Turbo6Smackdown]

they were also 3.8's werent they... 232 though right?

 

[91rangerturbo]

2.3 SOHC Ford Turbo
140ci

You can get that curved inlet bell off about any stock turbo 83-88 that was in the ford lineup. Mustang Svo,Turbo Coupe,merkur

None of the fords use the exact same turbo as the GN but they are close. We look into the GN turbo to make a hybrid stuffed in the Stock T-3 on a Ford.

I am sure that bell could be adapted to be used easy as far as bolt on i don't know for sure.

 

[SVORay]

2.3 SOHC Ford Turbo
140ci

You can get that curved inlet bell off about any stock turbo 83-88 that was in the ford lineup. Mustang Svo,Turbo Coupe,merkur

None of the fords use the exact same turbo as the GN but they are close. We look into the GN turbo to make a hybrid stuffed in the Stock T-3 on a Ford.

I am sure that bell could be adapted to be used easy as far as bolt on i don't know for sure.

Sorry I was out of town for a few days...anyways thats my site.


The above post is about all I know about the T3 turbos. I know some 2.3T guys would some how adapt a GN wheel to our turbos but not sure which one and how so. The best info on this topic would be Turboford.org This guys know the 2.3T inside and out.

Ray

 

[Turbo6Smackdown]

thanks.