V VIN7 Member Joined May 24, 2001 Oct 30, 2011 #21 Dave, With the ICC open go to the "monitor" tab, then right click in the graph area. You should see option to load log, then click on the ISL you want to view. Mike
Dave, With the ICC open go to the "monitor" tab, then right click in the graph area. You should see option to load log, then click on the ISL you want to view. Mike
T TurboDave RIP DAVE Staff member TurboBuick.Com Supporter! Joined May 24, 2001 Oct 30, 2011 #22 Got it. THanks. Bob set me straight.
V VIN7 Member Joined May 24, 2001 Nov 7, 2011 #23 ISAC rocks! Setup: 6262 dbb SP cover, THDP, HD wastegate, Ingersol Rand solenoid, ISAC controlling the solenoid. Attachments isacboost.jpg 65.9 KB · Views: 187
ISAC rocks! Setup: 6262 dbb SP cover, THDP, HD wastegate, Ingersol Rand solenoid, ISAC controlling the solenoid.
T TurboBob Resident mad scientist Staff member Joined May 24, 2001 Nov 7, 2011 #24 email me that log, I'l like to peek at a couple things. The ISA file also, if you have it handy. (quicksave saves both) Looks like its working well. Bob
email me that log, I'l like to peek at a couple things. The ISA file also, if you have it handy. (quicksave saves both) Looks like its working well. Bob
V VIN7 Member Joined May 24, 2001 Nov 7, 2011 #25 Bob, You got mail. Both the ISA and ISL files. Mike
V VIN7 Member Joined May 24, 2001 Nov 7, 2011 #26 The variation in the red line (target boost) in the screenshot above was just me tweaking the trim knob before I went WOT.
The variation in the red line (target boost) in the screenshot above was just me tweaking the trim knob before I went WOT.
S SlowFiero Member Joined Sep 21, 2003 Nov 7, 2011 #27 How much for ISAC and a solenoid for use with external gate? PM me if you want. Thanks!
T TurboBob Resident mad scientist Staff member Joined May 24, 2001 Nov 7, 2011 #28 I'm not sure what vendors are carrying it at the moment, Shane (SGRIM) would know better than I. Bob
S SGRIM Owner/Admin TB.com Staff member Joined Mar 1, 2005 Nov 8, 2011 #29 Gbodyparts has some and I have some. They can be found on the gbody website!
A aminga Chicks Dig the powerbulge Joined Dec 15, 2003 Nov 8, 2011 #30 VIN7. Mine is a similar setup. Mind sharing yoru Boost Control settings?
V VIN7 Member Joined May 24, 2001 Nov 8, 2011 #31 No problem. The tps and rpm enable settings are like that because I was testing the solenoid with Key on engine off. Also, now that I looked at it the target boost is varying because I have the tps/%boost configured as such. Mike Attachments ISAC 06Nov2011 3.zip 288 bytes · Views: 88 Log 06Nov2011 3.zip 11.8 KB · Views: 91
No problem. The tps and rpm enable settings are like that because I was testing the solenoid with Key on engine off. Also, now that I looked at it the target boost is varying because I have the tps/%boost configured as such. Mike
A aminga Chicks Dig the powerbulge Joined Dec 15, 2003 Mar 9, 2018 #33 Is there updated SW past this one. New laptop